HardLabs

Elektroniikkapaja vastaanotin

ripaskajaska·Wireless-weather-station·KiCad_projekti/Elektroniikkapaja-vastaanotin/Elektroniikkapaja-vastaanotin.kicad_pcb

Elektroniikkapaja vastaanotin PCB layout, top view — open source AVR/Arduino board by ripaskajaska

About the Elektroniikkapaja vastaanotin PCB

Elektroniikkapaja vastaanotin is an open source AVR/Arduino PCB design by ripaskajaska, published on GitHub. It is a 2-layer board measuring 77 × 77 mm, with 58 components from 35 distinct parts.

Its main chip is the ATMEGA328PB-A, from the AVR/Arduino family. Other key parts include the MICRF220AYQS, FT230XS, MCP1700X-330XXTO, TL072 and SN74LS07N. By type, the board carries 21 capacitors, 13 resistors, 7 connectors, 6 ICs, 5 diodes and 2 crystals.

It belongs with the iot & wireless designs in this gallery.

From the project

Aalto University’s ELEC-8701 Elektronics workshop course's repository for Axel Soderberg, Roope Jaskari and Kalle Aro

Sections 1 to 2 are done on the command line # 1. Initialization

If you don't have an ssh key yet follow the instruction in this link Add this ssh key to your GitHub SSH keys and proceed.

Go to the cloned repository > "Wireless-weather-station" (default name)

When you want to commit something, first check out the changes you have made.

After this add the files you'd like to commit

Elektroniikkapaja vastaanotin, from the project README
From the project README

Main components on the Elektroniikkapaja vastaanotin

ATMEGA328PB-AMICRF220AYQSFT230XSMCP1700X-330XXTOTL072SN74LS07N

Elektroniikkapaja vastaanotin bill of materials (BOM)

58 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328PB-A
ATmega328PB-A
U1
1
MICRF220AYQS
U2
1
FT230XS
U3
1
MCP1700X-330XXTO
MCP1700x-330xxTO
U4
1
TL072
U5
1
SN74LS07N
U6
1
13.52313MHZ
13.52313MHz
Y1
1
Crystal 16MHz
Y2
1
USB_B
J1
1
Conn_Coaxial
J2
1
CONN_01X04_PIN
Conn_01x04_Pin
J3
1
AVR-ISP-6
J4
1
CONN_01X04_PIN
Conn_01x04_Pin
J5
1
CONN_01X06_PIN
Conn_01x06_Pin
J6
1
CONN_01X08_PIN
Conn_01x08_Pin
J7
2
SOLDERJUMPER_3_OPEN
SolderJumper_3_Open
JP1, JP2
1
SW_Push
SW_reset1
5
LED
D1, D2, D3, D4, D5
1
39NH
39nH
L2
2
47PF
47pF
C1, C2
Show 15 more
QtyPartRefs
2
4.7UF
4.7uF
C3, C17
9
100NF
100nF
C4, C5, C10, C11, C12, C14, C18, C20 +1
2
1UF
1uF
C6, C7
2
10PF
10pF
C8, C9
1
10UF
10uF
C13
2
22PF
22pF
C15, C16
1
1.2PF
1.2pF
C19
2
560R
R1, R2
2
27R
R3, R4
1
150R
150r
R5
1
100R
100r
R6
1
330R
330r
R7
4
4K7
4k7
R8, R9, R10, R11
1
10K
10k
R12
1
150R
150r
R13

Elektroniikkapaja vastaanotin design files

The KiCad project lives in the ripaskajaska/Wireless-weather-station repository on GitHub; these links point at the commit this page was built from.

Elektroniikkapaja vastaanotin: common questions

What microcontroller does the Elektroniikkapaja vastaanotin use?

The Elektroniikkapaja vastaanotin is built around the ATMEGA328PB-A, from the AVR/Arduino family.

How big is the Elektroniikkapaja vastaanotin PCB?

The Elektroniikkapaja vastaanotin measures 77 × 77 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Elektroniikkapaja vastaanotin?

58 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Elektroniikkapaja vastaanotin design files?

From the ripaskajaska/Wireless-weather-station repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Elektroniikkapaja vastaanotin design in my own project?

The repository has no license, so all rights stay with ripaskajaska. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Elektroniikkapaja vastaanotin without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Wireless-weather-station

Similar boards