RishiStarbie
rishigovindnair-web·RishiStarbie·pcb/RishiStarbie.kicad_pcb
About the RishiStarbie PCB
RishiStarbie is an open source ESP32 PCB design by rishigovindnair-web, published on GitHub. It is a 2-layer board measuring 94.7 × 90.4 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the sensors and power & battery designs in this gallery.
From the project
These are my Starbie files for Hackclub Halflife
My Starbie for Week 1 of Hack Club Half-Life. A Starbie is a desk pet built on a star-shaped circuit board. It has "emotions" like joy and energy, and you look after it through a menu where you can do things like feed it.
1. Install KiCad 7 or newer (the files are saved in KiCad 7 format, so 8 and 9 open them too). 2. Clone or download this repo. Keep the folder structure as it is. 3. Open pcb/RishiStarbie.kicadpro`. The schematic and PCB editors open from there.
Main components on the RishiStarbie
RishiStarbie bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3 | XIAO-ESP32-C3-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | OLED | Display_128x64_096_I2C | J1 |
| 1 | MPU6050 | MPU6050_Module | J2 |
| 2 | MX switch | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
RishiStarbie design files
The KiCad project lives in the rishigovindnair-web/RishiStarbie repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/RishiStarbie.kicad_pcb
- Schematicpcb/RishiStarbie.kicad_sch
- BOMproduction/BOM.csv
RishiStarbie: common questions
What microcontroller does the RishiStarbie use?
The RishiStarbie is built around the XIAO-ESP32-C3, from the ESP32 family.
How big is the RishiStarbie PCB?
The RishiStarbie measures 94.7 × 90.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RishiStarbie?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RishiStarbie design files?
From the rishigovindnair-web/RishiStarbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RishiStarbie design in my own project?
The repository has no license, so all rights stay with rishigovindnair-web. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RishiStarbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k