Muse
RishitJain-dev·Muse·PCB/Muse - The Modern iPod.kicad_pcb
About the Muse PCB
Muse is an open source ESP32 PCB design by RishitJain-dev, published on GitHub. It is a 2-layer board measuring 84.3 × 56.5 mm, with 15 components from 11 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the PCM5102A. By type, the board carries 6 capacitors, 3 connectors, 2 ICs, 2 switches and 2 resistors.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
A modern iPod-like device with a micro-SD card slot and a headphone jack, all controlled with a rotary encoder dial, buttons and a screen.
It is programmed in C++, using Arduino IDE to compile! The micro controller is the XIAO ESP32-C3.
Total price is around $110 including filament and PCB prices. Please note that prices fluctuate! Check the BOM.csv for more detailed financial information.
This project consists of 2 main parts, the PCB and CAD. The PCB was designed in KiCAD, while the CAD was made in Onshape. This project is fully open source for NON COMMERCIAL purposes.
Main components on the Muse
Muse bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | microSD | microSD_External_Pin | J1 |
| 1 | AudioJack3 | Jack_3.5mm_CUI_SJ1-3513N_Horizontal | J2 |
| 1 | ST7789 | Adafruit 1.9 320x170 Colour IPS TFT Display (ST7789) | J3 |
| 1 | RotaryEncoder | RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW1 |
| 1 | Push_Button | SW_PUSH_6mm | SW2 |
| 2 | 0.1uF | C_0402_1005Metric | C1, C4 |
| 2 | 2.2uF | C_0402_1005Metric | C2, C3 |
| 2 | 2200pF | C_0402_1005Metric | C5, C6 |
| 2 | 100ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Muse design files
The KiCad project lives in the RishitJain-dev/Muse repository on GitHub; these links point at the commit this page was built from.
Muse: common questions
What microcontroller does the Muse use?
The Muse is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Muse PCB?
The Muse measures 84.3 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Muse?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Muse design files?
From the RishitJain-dev/Muse repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Muse design in my own project?
The repository has no license, so all rights stay with RishitJain-dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Muse without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k