Compe6502 SD Breakout
About the Compe6502 SD Breakout
Compe6502 SD Breakout is an open source PCB design by rjhelms, published on GitHub. It is a 2-layer board measuring 50.8 × 31.8 mm, with 9 components from 8 distinct parts.
Other key parts include the 74HC4050 and MCP1700-3302E. By type, the board carries 3 connectors, 3 capacitors, 2 ICs and 1 resistor.
It belongs with the retro computing and dev boards & breakouts designs in this gallery.
From the project
Homebrew 6502 system
A very much work-in-progress homebrew 6502 system.
Hardware is currently built off of a 6502 protoboard, available at https://github.com/rjhelms/6502proto.
All hardware CC-BY-SA 4.0. All software zlib license unless otherwise specified.
Main components on the Compe6502 SD Breakout
Compe6502 SD Breakout bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC4050 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | MCP1700-3302E | SOT-23 | U2 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SD_Card | SD_Kyocera_145638009511859+ | J3 |
| 2 | 1u | C_0805_2012Metric | C1, C2 |
| 1 | 100n | C_0805_2012Metric | C3 |
| 1 | 1K00 | R_0805_2012Metric | R1 |
Compe6502 SD Breakout design files
The KiCad project lives in the rjhelms/compe6502 repository on GitHub; these links point at the commit this page was built from.
Compe6502 SD Breakout: common questions
How big is the Compe6502 SD Breakout?
The Compe6502 SD Breakout measures 50.8 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Compe6502 SD Breakout?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Compe6502 SD Breakout design files?
From the rjhelms/compe6502 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Compe6502 SD Breakout design in my own project?
The repository has no license, so all rights stay with rjhelms. Use it as a reference, and ask the author before reusing the design.
More boards in compe6502
Compe 6502 Mainboard
167.6 × 134.6 mm93 parts2LNo license2
74 Character Generator
124.5 × 99.1 mm77 parts4LNo license2
AVR/ArduinoVIA I/O Card
99.1 × 78.7 mm69 parts2LNo license2
Compe 6502 Protocard
99.1 × 78.7 mm26 parts2LNo license2
Compe 6502 Prototyping Backplane
132.1 × 109.2 mm23 parts2LNo license2
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979