7 open source boards using the MCP1700-3302E
Real designs built with the MCP1700-3302E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
MTouch Test
drewsum
65.1 × 43.9 mm88 parts2LNo license2Xilwatch hw
xil-se
37.8 × 50 mm64 parts2LNo license2RP2040/RP2350
Eugeo
konifar
284.9 × 75.4 mm131 parts2LMIT0STM32
UHoubolt PCB GNSS
SpaceTeam
84.9 × 76 mm85 parts4LCERN-OHL-W-2.00ESP32
D03-MAIN-CTRL
byhabibi
160 × 115 mm59 parts2LNo license0STM32
Vehicle movement parameters
Iverson-45
79 × 75 mm54 parts2LNo license0Compe6502 SD Breakout
rjhelms
50.8 × 31.8 mm9 parts2LNo license2
How designs wire the MCP1700-3302E
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP1700-3302E connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 4 of 7 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: 5V 71% · a signal 29% |
|
| VOpin 3 | Connected to: 3.3V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MTouch Test by drewsum, Compe6502 SD Breakout by rjhelms, Xilwatch hw by xil-se and D03-MAIN-CTRL by byhabibi.
The MCP1700-3302E in open source designs
The gallery holds 7 open source boards using the MCP1700-3302E from 7 GitHub repositories; a typical one measures about 79 × 75 mm and carries around 64 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is MTouch Test by drewsum.
Microcontrollers on boards using the MCP1700-3302E
What boards using the MCP1700-3302E are built for
MCP1700-3302E: common questions
Where can I find a MCP1700-3302E reference design?
Each of the 7 boards on this page is a real design using the MCP1700-3302E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700-3302E VO pin?
The VO pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP1700-3302E.
What decoupling capacitors do designs use on the MCP1700-3302E VI pin?
The VI pin has a decoupling capacitor on 4 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the MCP1700-3302E.
Which microcontrollers do boards using the MCP1700-3302E use?
Most are built on STM32 (2), ESP32 (1), PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the MCP1700-3302E?
The median is 79 × 75 mm, and 86% are two-layer designs.
What is the most popular open source board using the MCP1700-3302E?
By GitHub stars, MTouch Test by drewsum, with 2 stars.
Can I simulate one of these boards using the MCP1700-3302E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.