15 open source boards using the 74HC4050

Real designs built with the 74HC4050, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the 74HC4050

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 74HC4050 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 13 is left unconnected on 12 of 12 designs.
  • Pin 16 is left unconnected on 12 of 12 designs.
  • The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF.
  • Pin 12 is left unconnected on 8 of 12 designs (a signal on 4).
VCCpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (8)
VSSpin 8Connected to: GND 100%
Pin 10Connected to: A connector 25% · not connected 25%
  • Series resistor on 33% · 10 kΩ (2), 1 kΩ (2), 330 Ω (1)
Pin 12Connected to: Not connected 67% · a signal 33%
Pin 13Connected to: Not connected 100%
Pin 16Connected to: Not connected 100%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ProgrammableRelayModule2Channel by numato, AS3397 eurorack 0603 by PhysicsDptAngers, VIDEO by lkesteloot and Z80Atmega128 by 46nori.

The 74HC4050 in open source designs

The gallery holds 15 open source boards using the 74HC4050 from 12 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 78 components.

92% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is ProgrammableRelayModule4Channel by numato.

Parts used alongside the 74HC4050

Microcontrollers on boards using the 74HC4050

74HC4050: common questions

Where can I find a 74HC4050 reference design?

Each of the 15 boards on this page is a real design using the 74HC4050. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC4050 pin 13 connected?

Pin 13 is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the 74HC4050.

How is the 74HC4050 pin 16 connected?

Pin 16 is left unconnected on 12 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the 74HC4050.

What decoupling capacitors do designs use on the 74HC4050 VCC pin?

The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the 74HC4050.

What parts are used alongside the 74HC4050?

The 74HC04, 74HC32 and 74HC74 appear in the most repositories here.

Which microcontrollers do boards using the 74HC4050 use?

Most are built on AVR/Arduino (5), RP2040/RP2350 (3) and STM32 (2).

How big is a typical board using the 74HC4050?

The median is 100 × 80 mm, and 92% are two-layer designs.

What is the most popular open source board using the 74HC4050?

By GitHub stars, ProgrammableRelayModule4Channel by numato, with 143 stars.

Can I simulate one of these boards using the 74HC4050 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part