Snsr tree
robertshepherdcpp·snsr_tree·PCB/environment_proj.kicad_pcb
About the Snsr tree PCB
Snsr tree is an open source ESP32 PCB design by robertshepherdcpp, published on GitHub. It is a 2-layer board measuring 104 × 144.5 mm, with 29 components from 19 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the SCD40-D-R2 and MAX98357A. By type, the board carries 11 resistors, 7 capacitors, 4 ICs, 4 diodes, 1 connector and 1 microphone.
It belongs with the sensors, audio and iot & wireless designs in this gallery.
From the project
my sixth project for fallout
BOM: | Name | Price | Link |…
Main components on the Snsr tree
Snsr tree bill of materials (BOM)
29 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-DIP | XIAO-ESP32-C6-DIP | U1 |
| 1 | ~ MICROCHIP(美国微芯) | QFN-28_L6.0-W6.0-P0.65-BL-EP3.7 | U2 |
| 1 | SCD40-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U3 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | Micro_SD_Card | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | MK1 |
| 1 | ~ INGHAi(赢海) | SPK-TH_BD23.0-P10.00-D0.8-L-RD | SPK4 |
| 1 | LED | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | D1 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 4.7uF | C_0603_1608Metric | C2 |
| 2 | 10uF | C_0603_1608Metric | C3, C5 |
| 2 | 100nF | C_0603_1608Metric | C4, C6 |
| 1 | 1uF | C_0603_1608Metric | C8 |
| 4 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8 |
| 1 | A1050 | R_LDR_D6.4mm_P3.4mm_Vertical | R6 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R10, R11 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
Snsr tree design files
The KiCad project lives in the robertshepherdcpp/snsr_tree repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/environment_proj.kicad_pcb
- SchematicPCB/environment_proj.kicad_sch
- BOMBOM/bom.csv
Snsr tree: common questions
What microcontroller does the Snsr tree use?
The Snsr tree is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the Snsr tree PCB?
The Snsr tree measures 104 × 144.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Snsr tree?
29 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Snsr tree design files?
From the robertshepherdcpp/snsr_tree repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Snsr tree design in my own project?
The repository has no license, so all rights stay with robertshepherdcpp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Snsr tree without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k