Tamagotchi
robertshepherdcpp·tamagotchi·PCB/luna.kicad_pcb
About the Tamagotchi PCB
Tamagotchi is an open source ESP32 PCB design by robertshepherdcpp, published on GitHub. It is a 2-layer board measuring 81 × 98 mm, with 8 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the HS96L03W2C03. By type, the board carries 5 switches and 2 ICs.
From the project
my second project for fallout
what the project is: - a custom tamagotchi consisting of a pcb designed in kiad and a case designed in the CAD software Fusion360 what the tamagotchi consists of: - - a 3d case + lid - the pcb which consists of: XIAO-ESP32-C6, buzzer, rotary encoder, 4 buttons, and a 0.96" screen.
why i chose to make with project (the inspiration/motivation): - as i am still new to hardware, i thought having a tutorial as a fallback for if i got stuck would be useful (avoid endless rabbit holes hhh). also i remember using a tamagotchi when i was younger and thought it was pretty cool - so i decided to make a…
Main components on the Tamagotchi
Tamagotchi bill of materials (BOM)
8 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-DIP | XIAO-ESP32-C6-DIP | U1 |
| 1 | HS96L03W2C03 HS(汉昇) | OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U2 |
| 1 | 1207-P6.5MM XHXDZ(兴华鑫) | BUZ-TH_BD12.5-P6.50-D1.4 | BUZZER1 |
| 4 | SW_Push | SW_Push_1P1T_NO_CK_KSC6xxG | SW1, SW2, SW3, SW4 |
| 1 | RotaryEncoder | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
Tamagotchi design files
The KiCad project lives in the robertshepherdcpp/tamagotchi repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/luna.kicad_pcb
- SchematicPCB/luna.kicad_sch
- BOMBOM/BOM.csv
Tamagotchi: common questions
What microcontroller does the Tamagotchi use?
The Tamagotchi is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the Tamagotchi PCB?
The Tamagotchi measures 81 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tamagotchi?
8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tamagotchi design files?
From the robertshepherdcpp/tamagotchi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tamagotchi design in my own project?
The repository has no license, so all rights stay with robertshepherdcpp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tamagotchi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k