7 open source boards using the 74LVC541A

Real designs built with the 74LVC541A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74LVC541A

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC541A connects to, and the resistors, capacitors and other passives placed on it.

  • The G2 pin is tied to GND on 5 of 5 designs.
  • The Y3 pin has a series resistor on 4 of 5 designs, most often 33 Ω (then 47 Ω).
  • The Y2 pin has a series resistor on 4 of 5 designs, most often 33 Ω (then 47 Ω).
  • The Y1 pin has a series resistor on 4 of 5 designs, most often 33 Ω (then 47 Ω).
G1pin 1Connected to: GND 60% · a signal 40%
A4pin 5Connected to: A connector 60%
  • Series resistor on 40% · 22 Ω (1), 47 kΩ (1)
GNDpin 10Connected to: GND 100%
Y8pin 11Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 33 Ω (2), 47 Ω (1)
Y7pin 12Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 33 Ω (2), 47 Ω (1)
Y6pin 13Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 33 Ω (2), 47 Ω (1)
Y5pin 14Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 33 Ω (2), 47 Ω (1)
Y4pin 15Connected to: Signal 100%
  • Series resistor on 60% · 33 Ω (7), 47 Ω (1)
Y3pin 16Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (7), 47 Ω (2), 47 kΩ (1)
Y2pin 17Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (3), 47 Ω (2), 47 kΩ (1)
Y1pin 18Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (3), 47 Ω (2), 47 kΩ (1)
G2pin 19Connected to: GND 100%
VCCpin 20Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (2)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSPx-ADAT-IO-x4 by freeDSP, Bkm-68x simple by skumlos, Kepler x by kunichiko and Tia fpga by lrrosa.

The 74LVC541A in open source designs

The gallery holds 7 open source boards using the 74LVC541A from 5 GitHub repositories; a typical one measures about 208.3 × 100 mm and carries around 181 components.

57% use four copper layers or more, and 43% carry an open source license.

The most starred is FreeDSPx-ADAT-IO-x4 by freeDSP.

Parts used alongside the 74LVC541A

Microcontrollers on boards using the 74LVC541A

What boards using the 74LVC541A are built for

74LVC541A: common questions

Where can I find a 74LVC541A reference design?

Each of the 7 boards on this page is a real design using the 74LVC541A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LVC541A G2 pin connected?

The G2 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LVC541A.

What resistor goes on the 74LVC541A Y3 pin?

The Y3 pin has a series resistor on 4 of 5 designs, most often 33 Ω (then 47 Ω). Counted from the KiCad layouts of 5 open source designs using the 74LVC541A.

What resistor goes on the 74LVC541A Y2 pin?

The Y2 pin has a series resistor on 4 of 5 designs, most often 33 Ω (then 47 Ω). Counted from the KiCad layouts of 5 open source designs using the 74LVC541A.

Which microcontrollers do boards using the 74LVC541A use?

Most are built on FPGA (1) and RISC-V (1).

How big is a typical board using the 74LVC541A?

The median is 208.3 × 100 mm, and 43% are two-layer designs.

What is the most popular open source board using the 74LVC541A?

By GitHub stars, FreeDSPx-ADAT-IO-x4 by freeDSP, with 10 stars.

Can I simulate one of these boards using the 74LVC541A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part