Presence sensor

rolaca11·presence-sensor·pcb/presence-sensor.kicad_pcb

Presence sensor PCB layout, top view — open source board by rolaca11

About the Presence sensor PCB

Presence sensor is an open source PCB design by rolaca11, published on GitHub under the MIT license. It is a 4-layer board measuring 30 × 36 mm, with 31 components from 15 distinct parts.

Other key parts include the CC2340R52E0RGER and XC6206P332MR-G. By type, the board carries 16 capacitors, 6 resistors, 2 ICs, 2 crystals, 2 connectors and 2 switches.

It belongs with the sensors designs in this gallery.

From the project

A compact Zigbee presence sensor based on the Texas Instruments CC2340R5 microcontroller and a UART-connected mmWave radar module. Detects human presence and reports occupancy over Zigbee, with configurable detection parameters.

A compact Zigbee presence sensor based on the Texas Instruments CC2340R5 microcontroller and a UART-connected mmWave radar module. Detects human presence and reports occupancy over Zigbee, with configurable detection parameters.

- CC2340R5 - Low-power Zigbee microcontroller - mmWave radar sensor - UART-connected presence detection module with configurable range, sensitivity, and latency - Zigbee End Device - Occupancy Sensing cluster with custom attributes for remote sensor configuration - USB-C - Power supply - Programming header - 3-pin JST-SH connector for flashing firmware (compatible…

Main components on the Presence sensor

Presence sensor bill of materials (BOM)

31 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CC2340R52E0RGER
Texas Instruments
U1
1
XC6206P332MR-G
Torex Semicon
U3
1
XC32M4-48.000-F08NLDT
48M
HCI
Y1
1
Q13FC13500049
32k768
Seiko Epson
Y2
1
SM03B-SRSS-TB(LF)(SN)
RPI_DEBUG_PROBE
JST
J2
1
USB4105-GF-A-120
USB_C_Receptacle_USB2.0_16P
Global Connector Technology
J3
2
B3U-1100PM
SW_Push
Omron Electronics
SW1, SW2
1
SDCL1005C2N7STDF
2n8
Sunlord
L2
5
CC0603KRX7R9BB104
0u1
YAGEO
C1, C2, C3, C5, C6
2
CL10A106KP8NNNC
10u
Samsung Electro-Mechanics
C4, C10
5
CL10A105KB8NNNC
1u
Samsung Electro-Mechanics
C7, C8, C9, C13, C17
2
CL10C150JB8NNNC
15p
Samsung Electro-Mechanics
C11, C12
2
0603CG1R5C500NT
1p5
FH (Guangdong Fenghua Advanced Tech)
C14, C15
5
0603WAF1003T5E
5k1
UNI-ROYAL(Uniroyal Elec)
R1, R2, R3, R4, R5
1
0603WAF0000T5E
0
UNI-ROYAL(Uniroyal Elec)
R6

Presence sensor design files

The KiCad project lives in the rolaca11/presence-sensor repository on GitHub; these links point at the commit this page was built from.

Presence sensor: common questions

How big is the Presence sensor PCB?

The Presence sensor measures 30 × 36 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Presence sensor?

31 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Presence sensor design files?

From the rolaca11/presence-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Presence sensor design in my own project?

Yes, under the terms of its MIT license, which rolaca11 chose for the repository.

Similar boards