VT100 GRAPH
Roland-Scholz·FABIAN·KiCad/VT100/VT100_GRAPH/VT100_GRAPH.kicad_pcb
About the VT100 GRAPH PCB
VT100 GRAPH is an open source PCB design by Roland-Scholz, published on GitHub. It is a 2-layer board measuring 100.3 × 100.3 mm, with 20 components from 14 distinct parts.
Other key parts include the 74LS573 Char, MC6845, 74LS573 Color Buffer, 74LS245 AddrCharColor Lo and 74LS245 AddrCharColor Hi. By type, the board carries 11 ICs, 4 capacitors, 4 resistors and 1 connector.
From the project
FAbulous BInary ANihilator
A simple Z80 based CP/M system. You'll find here:
- KiCad files for the pcb - 6-chip Z80 hardware - 64KB static RAM - 8/16/32KB (EP)ROM, here a 2764A version is used (8KB, 12,5V pgm voltage) - 68681 double UART operating at 115200 baud - one serial line connects to a VT100 terminal, the 2nd one to the CP/M disk server (two TTL to RS232 converters needed) - GAL 16V8 providing glue logic (fabian.pld, connect PIN 5 and 15 with a pice of wire) - WinCUPL https://www.microchip.com/en-us/products/fpgas-and-plds/spld-cplds/pld-design-resources) - CP/M-2.2 and simple BIOS source code (CP/M at $E400…

Main components on the VT100 GRAPH
VT100 GRAPH bill of materials (BOM)
20 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS573 Char | DIP-20_W7.62mm | U1 |
| 1 | MC6845 | DIP-40_W15.24mm | U2 |
| 1 | 74LS573 Color Buffer | DIP-20_W7.62mm | U3 |
| 1 | 74LS245 AddrCharColor Lo | DIP-20_W7.62mm | U4 |
| 1 | 74LS245 AddrCharColor Hi | DIP-20_W7.62mm | U5 |
| 1 | 74LS573 Color | DIP-20_W7.62mm | U6 |
| 1 | 74LS245 CharsetAdr 1 | DIP-20_W7.62mm | U7 |
| 1 | UM61256 GraphRam | DIP-28_W7.62mm | U8 |
| 1 | 74LS573 Charline | DIP-20_W7.62mm | U9 |
| 1 | 74LS299 | DIP-20_W7.62mm | U10 |
| 1 | 74LS257 | DIP-16_W7.62mm | U11 |
| 1 | Conn_02x36_Odd_Even | PinSocket_2x36_P2.54mm_Vertical | J1 |
| 4 | 100nF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2, C3, C4 |
| 4 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4 |
VT100 GRAPH design files
The KiCad project lives in the Roland-Scholz/FABIAN repository on GitHub; these links point at the commit this page was built from.
VT100 GRAPH: common questions
How big is the VT100 GRAPH PCB?
The VT100 GRAPH measures 100.3 × 100.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VT100 GRAPH?
20 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the VT100 GRAPH design files?
From the Roland-Scholz/FABIAN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the VT100 GRAPH design in my own project?
The repository has no license, so all rights stay with Roland-Scholz. Use it as a reference, and ask the author before reusing the design.