VT100 MCU

Roland-Scholz·FABIAN·KiCad/VT100/VT100_MCU/VT100_MCU.kicad_pcb

VT100 MCU PCB layout, top view — open source board by Roland-Scholz

About the VT100 MCU PCB

VT100 MCU is an open source PCB design by Roland-Scholz, published on GitHub. It is a 2-layer board measuring 100.3 × 100.3 mm, with 25 components from 19 distinct parts.

Other key parts include the AT89S52-24PC, 74LS573, XC9536PC44, UM61256 and 74LS573 GA0-7. By type, the board carries 8 ICs, 7 capacitors, 4 connectors, 2 resistors, 1 crystal and 1 switch.

From the project

FAbulous BInary ANihilator

A simple Z80 based CP/M system. You'll find here:

- KiCad files for the pcb - 6-chip Z80 hardware - 64KB static RAM - 8/16/32KB (EP)ROM, here a 2764A version is used (8KB, 12,5V pgm voltage) - 68681 double UART operating at 115200 baud - one serial line connects to a VT100 terminal, the 2nd one to the CP/M disk server (two TTL to RS232 converters needed) - GAL 16V8 providing glue logic (fabian.pld, connect PIN 5 and 15 with a pice of wire) - WinCUPL https://www.microchip.com/en-us/products/fpgas-and-plds/spld-cplds/pld-design-resources) - CP/M-2.2 and simple BIOS source code (CP/M at $E400…

VT100 MCU, from the project README
From the project README

Main components on the VT100 MCU

AT89S52-24PC74LS573XC9536PC44UM6125674LS573 GA0-774LS573 GA8-1574LS573 GD0-7

VT100 MCU bill of materials (BOM)

25 components, 19 distinct parts.

QtyPartRefs
1
AT89S52-24PC
U1
1
74LS573
U2
1
XC9536PC44
U3
1
UM61256
U4
1
74LS573 GA0-7
U5
1
74LS573 GA8-15
U6
2
74LS573 GD0-7
U7, U8
1
25.175Mhz
X1
1
USB_B
J1
1
Conn_02x05_Odd_Even
J2
1
Conn_01x04_Male
J3
1
Conn_02x36_Odd_Even
J4
1
22.1184Mhz
Crystal1
1
SW_Push
SW1
1
LED
D1
2
33pF
C1, C3
1
C_Pol.
C2
4
100nF
C4, C5, C6, C7
2
1K
R1, R2

VT100 MCU design files

The KiCad project lives in the Roland-Scholz/FABIAN repository on GitHub; these links point at the commit this page was built from.

VT100 MCU: common questions

How big is the VT100 MCU PCB?

The VT100 MCU measures 100.3 × 100.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the VT100 MCU?

25 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the VT100 MCU design files?

From the Roland-Scholz/FABIAN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the VT100 MCU design in my own project?

The repository has no license, so all rights stay with Roland-Scholz. Use it as a reference, and ask the author before reusing the design.

More boards in FABIAN