Z80CPM

Roland-Scholz·FABIAN·KiCad/Z80CPM/Z80CPM.kicad_pcb

Z80CPM PCB layout, top view — open source board by Roland-Scholz

About the Z80CPM PCB

Z80CPM is an open source PCB design by Roland-Scholz, published on GitHub. It is a 2-layer board measuring 99.1 × 100.3 mm, with 28 components from 16 distinct parts.

Other key parts include the Z80CPU, GAL16V8, 27C256, UM61256 and SCC68681C1A44. By type, the board carries 9 capacitors, 7 resistors, 6 ICs, 3 connectors, 1 switch and 1 diode.

From the project

FAbulous BInary ANihilator

A simple Z80 based CP/M system. You'll find here:

- KiCad files for the pcb - 6-chip Z80 hardware - 64KB static RAM - 8/16/32KB (EP)ROM, here a 2764A version is used (8KB, 12,5V pgm voltage) - 68681 double UART operating at 115200 baud - one serial line connects to a VT100 terminal, the 2nd one to the CP/M disk server (two TTL to RS232 converters needed) - GAL 16V8 providing glue logic (fabian.pld, connect PIN 5 and 15 with a pice of wire) - WinCUPL https://www.microchip.com/en-us/products/fpgas-and-plds/spld-cplds/pld-design-resources) - CP/M-2.2 and simple BIOS source code (CP/M at $E400…

Z80CPM, from the project README
From the project README

Main components on the Z80CPM

Z80CPUGAL16V827C256UM61256SCC68681C1A44

Z80CPM bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
Z80CPU
U1
1
GAL16V8
U2
1
27C256
U3
2
UM61256
U4, U5
1
SCC68681C1A44
U6
1
USB_B
J1
1
Conn_01x04_Male
J2
1
Conn_01x22
J3
1
Crystal
3,6864Mhz1
1
SW_Push
SW1
1
LD271
D1
1
C_Polarized
C1
6
100nF
C2, C4, C5, C7, C8, C9
2
20pF
C3, C6
6
10K
R1, R2, R3, R4, R5, R7
1
1K
R6

Z80CPM design files

The KiCad project lives in the Roland-Scholz/FABIAN repository on GitHub; these links point at the commit this page was built from.

Z80CPM: common questions

How big is the Z80CPM PCB?

The Z80CPM measures 99.1 × 100.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Z80CPM?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Z80CPM design files?

From the Roland-Scholz/FABIAN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Z80CPM design in my own project?

The repository has no license, so all rights stay with Roland-Scholz. Use it as a reference, and ask the author before reusing the design.

More boards in FABIAN