31 open source boards using the 74LS257
Real designs built with the 74LS257, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
C64 Motherboard KU-14194HB
baldengineer
390.2 × 180.3 mm220 parts2LCC-BY-4.0442C64-250407-Replica
bwack
390 × 179.8 mm214 parts2LCERN-OHL-1.2116EPSM-Famicom
Perkka2
99 × 91.7 mm59 parts4LCustom license76KU-14194HB-RevB
bwack
390.2 × 180.3 mm221 parts2LNo license67St251n 20603
schlae
137.4 × 199.1 mm277 parts4LNo license38Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033Apple-II-R0
reifsnyderb
215.5 × 361.2 mm189 parts2LNo license26Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license20Jupiter-II-Expansion
ricaflops
164.5 × 71.8 mm95 parts2LMIT15MetaphoricV2
OldWer
204.5 × 138 mm140 parts2LCC0-1.05Oric
Board-Folk
206.2 × 138.1 mm127 parts2LNo license4PET-PCG-2024
cbmuser
53.9 × 136.3 mm15 parts2LNo license4- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 VT100
Roland-Scholz
99.1 × 99.1 mm33 parts2LNo license1Atari st mod rgb565-experiment
sporniket
99.1 × 63.5 mm33 parts4LNo license1Compact64
mariella-dejong
390 × 179.8 mm234 parts2LCERN-OHL-S-2.002K-BWS
felge1966
170.2 × 94 mm48 parts2LAGPL-3.00WINK MSP-MDC redux
hkzlab
104.1 × 106.7 mm41 parts2LCC-BY-NC-4.00AVR/Arduino
4Bit Adder
Ventratrat
78.7 × 71.1 mm25 parts2LGPL-3.00Commodore Plus 4
baldengineer
284.7 × 158.9 mm212 parts2LCC-BY-4.0442EPSM-Famicom rounded
Perkka2
99 × 91.7 mm59 parts4LCustom license76St296n 20741
schlae
137.4 × 199.1 mm269 parts4LNo license388086
homebrew8088
216.4 × 106.7 mm42 parts2LGPL-3.027Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license5328088
homebrew8088
132 × 73.9 mm22 parts2LGPL-3.0238EVA86-2
roberto314
251 × 157.7 mm86 parts2LNo license0EPSM-Famicom blank
Perkka2
99 × 91.5 mm39 parts2LCustom license76VT100 GRAPH
Roland-Scholz
100.3 × 100.3 mm20 parts2LNo license1386EX
homebrew8088
132 × 73.9 mm19 parts2LGPL-3.023880188
homebrew8088
143 × 73.9 mm18 parts2LGPL-3.0238
How designs wire the 74LS257
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the 74LS257 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 86% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL68 by MicroCoreLabs, Commodore Plus 4 by baldengineer, 386EX by homebrew8088 and C64-250407-Replica-KiCad by bwack.
The 74LS257 in open source designs
The gallery holds 31 open source boards using the 74LS257 from 23 GitHub repositories; a typical one measures about 152.6 × 106.7 mm and carries around 59 components.
81% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is MCL68 by MicroCoreLabs.
Parts used alongside the 74LS257
Microcontrollers on boards using the 74LS257
What boards using the 74LS257 are built for
74LS257: common questions
Where can I find a 74LS257 reference design?
Each of the 31 boards on this page is a real design using the 74LS257. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS257 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF. Counted from the KiCad layouts of 22 open source designs using the 74LS257.
What parts are used alongside the 74LS257?
The 74LS139, 74LS00, 74LS04, 74LS74 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS257 use?
Most are built on AVR/Arduino (1) and NXP (1).
How big is a typical board using the 74LS257?
The median is 152.6 × 106.7 mm, and 81% are two-layer designs.
What is the most popular open source board using the 74LS257?
By GitHub stars, MCL68 by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the 74LS257 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.