14 open source boards using the MC6845
Real designs built with the MC6845, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.05680ColumnCard
btb
155.2 × 78.6 mm47 parts2LApache-2.042CPC464-2MINI
Board-Folk
246.1 × 85 mm156 parts2LNo license10VIO MPF I
electrickery
156 × 100.1 mm63 parts2LNo license4Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03OSM39
christophetoularastel-eng
388.1 × 200 mm186 parts2LGPL-3.01Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1VT100
Roland-Scholz
99.1 × 99.1 mm33 parts2LNo license1RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0EVA1 production
roberto314
218 × 125 mm104 parts2LNo license0VideoBoard
Cptscorcher
143 × 175 mm51 parts2LGPL-3.00EVA86-2
roberto314
251 × 157.7 mm86 parts2LNo license0VT100 GRAPH
Roland-Scholz
100.3 × 100.3 mm20 parts2LNo license1CPCRAM
Bread80
99.1 × 70.3 mm17 parts2LCERN-OHL-P-2.05
How designs wire the MC6845
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MC6845 connects to, and the resistors, capacitors and other passives placed on it.
- The RA4 pin is left unconnected on 11 of 11 designs.
- The MA13 pin is left unconnected on 8 of 11 designs (a signal on 3).
- The MA12 pin is left unconnected on 7 of 11 designs (a signal on 4).
- The VCC pin has a decoupling capacitor on 5 of 11 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| MA12pin 16 | Connected to: Not connected 64% · a signal 36% | — |
| MA13pin 17 | Connected to: Not connected 73% · a signal 27% | — |
| VCCpin 20 | Connected to: 5V 100% |
|
| RA4pin 34 | Connected to: Not connected 100% | — |
35 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CGA Redux by hkzlab, 80ColumnCard by btb, CPC464-2MINI by Board-Folk and CPCRAM by Bread80.
The MC6845 in open source designs
The gallery holds 14 open source boards using the MC6845 from 11 GitHub repositories; a typical one measures about 218 × 115.3 mm and carries around 82 components.
86% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is CGA Redux by hkzlab.
Parts used alongside the MC6845
Microcontrollers on boards using the MC6845
What boards using the MC6845 are built for
MC6845: common questions
Where can I find a MC6845 reference design?
Each of the 14 boards on this page is a real design using the MC6845. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MC6845 RA4 pin connected?
The RA4 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MC6845.
How is the MC6845 MA13 pin connected?
The MA13 pin is left unconnected on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the MC6845.
How is the MC6845 MA12 pin connected?
The MA12 pin is left unconnected on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the MC6845.
What parts are used alongside the MC6845?
The 74LS00, 74LS86, 74LS04, 74LS157 and 74LS166 appear in the most repositories here.
Which microcontrollers do boards using the MC6845 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the MC6845?
The median is 218 × 115.3 mm, and 86% are two-layer designs.
What is the most popular open source board using the MC6845?
By GitHub stars, CGA Redux by hkzlab, with 56 stars.
Can I simulate one of these boards using the MC6845 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.