VT100
Roland-Scholz·FABIAN·KiCad/VT100/VT100.kicad_pcb
About the VT100 PCB
VT100 is an open source PCB design by Roland-Scholz, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 33 components from 25 distinct parts.
Other key parts include the AT89S52-24PC, MC6845, XC9536PC44, 74LS573 and 74LS245. By type, the board carries 19 ICs, 5 resistors, 3 connectors, 3 capacitors, 1 crystal and 1 switch.
From the project
FAbulous BInary ANihilator
A simple Z80 based CP/M system. You'll find here:
- KiCad files for the pcb - 6-chip Z80 hardware - 64KB static RAM - 8/16/32KB (EP)ROM, here a 2764A version is used (8KB, 12,5V pgm voltage) - 68681 double UART operating at 115200 baud - one serial line connects to a VT100 terminal, the 2nd one to the CP/M disk server (two TTL to RS232 converters needed) - GAL 16V8 providing glue logic (fabian.pld, connect PIN 5 and 15 with a pice of wire) - WinCUPL https://www.microchip.com/en-us/products/fpgas-and-plds/spld-cplds/pld-design-resources) - CP/M-2.2 and simple BIOS source code (CP/M at $E400…

Main components on the VT100
VT100 bill of materials (BOM)
33 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT89S52-24PC | DIP-40_W15.24mm | U1 |
| 1 | MC6845 | DIP-40_W15.24mm | U2 |
| 1 | XC9536PC44 | PLCC-44_THT-Socket | U3 |
| 1 | 74LS573 | DIP-20_W7.62mm | U4 |
| 2 | 74LS245 | DIP-20_W7.62mm | U5, U6 |
| 2 | UM61256 | DIP-28_W7.62mm | U7, U14 |
| 1 | 74LS245 CharsetAdr 1 | DIP-20_W7.62mm | U8 |
| 1 | 74LS573 GA0-7 | DIP-20_W7.62mm | U9 |
| 1 | 74LS573 GA8-15 | DIP-20_W7.62mm | U10 |
| 1 | 74LS573 Char | DIP-20_W7.62mm | U11 |
| 2 | 74LS573 GD0-7 | DIP-20_W7.62mm | U12, U13 |
| 1 | 74LS573 Color Buffer | DIP-20_W7.62mm | U15 |
| 1 | 74LS573 Charline | DIP-20_W7.62mm | U16 |
| 1 | 74LS299 | DIP-20_W7.62mm | U17 |
| 1 | 74LS573 Color | DIP-20_W7.62mm | U18 |
| 1 | 74LS257 | DIP-16_W7.62mm | U19 |
| 1 | 25.175Mhz | Oscillator_DIP-14 | X1 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J3 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22.1184Mhz | Crystal_HC18-U_Vertical | Crystal1 |
| 1 | SW_Push | C_Rect_L7.5mm_W6.5mm_P5.00mm | SW1 |
| 2 | 33pF | PinHeader_1x02_P2.54mm_Vertical | C1, C3 |
| 1 | C_Pol. | CP_Radial_D5.0mm_P2.50mm | C2 |
| 5 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5 |
VT100 design files
The KiCad project lives in the Roland-Scholz/FABIAN repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/VT100/VT100.kicad_pcb
- SchematicKiCad/VT100/VT100.kicad_sch
VT100: common questions
How big is the VT100 PCB?
The VT100 measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VT100?
33 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the VT100 design files?
From the Roland-Scholz/FABIAN repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the VT100 design in my own project?
The repository has no license, so all rights stay with Roland-Scholz. Use it as a reference, and ask the author before reusing the design.