Esp32-c3-led driver
romain894·esp32-c3-led-driver-pcb
About the Esp32-c3-led driver PCB
Esp32-c3-led driver is an open source ESP32 PCB design by romain894, published on GitHub. It is a 2-layer board measuring 67.5 × 60.5 mm, with 53 components from 21 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the TPS560430YFDBVR and 74AHCT125. By type, the board carries 18 resistors, 15 connectors, 8 transistors, 7 capacitors, 3 ICs and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
LED driver PCB based on an ESP32-C3 super mini
PCB based on an ESP32-C3 super mini to control LED:
- Wi-Fi - Up to 6 PWM channels with MOSFET - 3 analog inputs - 24-12V to 5V step down chip - Extension to add an IR remote - Possibility to add I2C peripherals - An extra MOSFET on a non-PWM channel (e.g. to control an ATX power supply)

Main components on the Esp32-c3-led driver
Esp32-c3-led driver bill of materials (BOM)
53 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI | MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | TPS560430YFDBVR | SOT95P280X145-6N | U2 |
| 1 | 74AHCT125 | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 7 | AO3400A | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q8 |
| 1 | IRLZ44N | TO-220-3_Horizontal_TabDown | Q7 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 4 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2, J3, J8, J14 |
| 2 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4, J9 |
| 7 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6, J7, J11, J12, J13, J15 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | 10uH | L_Chilisin_BMRA00040420 | L1 |
| 2 | 100nf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5 |
| 1 | 2.2uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | C_Polarized | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C4 |
| 2 | 470uF | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C6, C7 |
| 1 | 88.7K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 22.1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 9 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 +1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 22k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12, R13, R14, R15, R16, R17 |
Esp32-c3-led driver design files
The KiCad project lives in the romain894/esp32-c3-led-driver-pcb repository on GitHub; these links point at the commit this page was built from.
Esp32-c3-led driver: common questions
What microcontroller does the Esp32-c3-led driver use?
The Esp32-c3-led driver is built around the ESP32-C3_SUPERMINI, from the ESP32 family.
How big is the Esp32-c3-led driver PCB?
The Esp32-c3-led driver measures 67.5 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-c3-led driver?
53 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-c3-led driver design files?
From the romain894/esp32-c3-led-driver-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-c3-led driver design in my own project?
The repository has no license, so all rights stay with romain894. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-c3-led driver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k