ESP32-S3

Roshan-khatri78·Electronics-Projects-KiCad-·ESP32-S3/ESP32-S3.kicad_pcb

ESP32-S3 PCB layout, top view — open source ESP32 board by Roshan-khatri78

About the ESP32-S3 PCB

ESP32-S3 is an open source ESP32 PCB design by Roshan-khatri78, published on GitHub. It is a 4-layer board measuring 28 × 58 mm, with 38 components from 28 distinct parts.

Its main chip is the XL4015, from the ESP32 family. Other key parts include the L78L05ABU and TL431DBZ. By type, the board carries 12 resistors, 11 capacitors, 6 diodes, 4 connectors, 3 ICs and 2 transistors.

It belongs with the rf & radio, power & battery and iot & wireless designs in this gallery.

From the project

A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design. While they may not be perfect, I continuously improve my skills and update my work as I learn and grow.

A collection of electronics projects I designed in KiCad: schematics, PCB layouts, 3D models and, for many of them, Gerber files. I use it to learn by building, and every project here taught me something, including the mistakes. New projects get added as I go.

My biggest and most complex design so far: a 4-layer 4G GPS tracker board with an ESP32-S3 and a 4G modem with built-in GNSS. I redrew the whole schematic by hand as hierarchical sheets, assigned every footprint and 3D model, then placed and routed the full board.

ESP32-S3, from the project README
From the project README

Main components on the ESP32-S3

ESP32-S3 bill of materials (BOM)

38 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XL4015
ESP32-S3-WROOM-1
U1
1
L78L05ABU
TL1117-3.3
U2
1
TL431DBZ
CH343G
U3
2
SS8050
Q1, Q2
1
SCREW_TERMINAL_01X02
Conn_01x22_Pin
J1
1
SCREW_TERMINAL_01X02
USB_C_Receptacle_USB2.0_16P
J2
1
USB_C_Receptacle_USB2.0_16P
J3
1
Conn_01x22_Pin
J4
1
SS54
LED
D1
2
LED
D2, D6
1
WS2812B
D3
2
1N5819WS
D4, D5
2
470UF
0.1UF
C1, C3
1
10UF
0.1UF
C2
1
10UF
C4
1
1UF
10UF
C5
2
1UF
0.1UF
C6, C7
3
0.1UF
C8, C9, C11
1
1UF
C10
3
10K
5.1K
R1, R5, R7
Show 8 more
QtyPartRefs
1
270
5.1K
R2
1
2.2K
5.1K
R3
1
71.5K
5.1K
R4
2
5.1K
R6, R11
1
91K
5.1K
R8
1
10K
0
R9
1
0.05K
5.1K
R10
1
0
R12

ESP32-S3 design files

The KiCad project lives in the Roshan-khatri78/Electronics-Projects-KiCad- repository on GitHub; these links point at the commit this page was built from.

ESP32-S3: common questions

What microcontroller does the ESP32-S3 use?

The ESP32-S3 is built around the XL4015, from the ESP32 family.

How big is the ESP32-S3 PCB?

The ESP32-S3 measures 28 × 58 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the ESP32-S3?

38 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-S3 design files?

From the Roshan-khatri78/Electronics-Projects-KiCad- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-S3 design in my own project?

The repository has no license, so all rights stay with Roshan-khatri78. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-S3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Electronics-Projects-KiCad-

Similar boards