LoFive

Roshan-khatri78·Electronics-Projects-KiCad-·LoFive/LoFive.kicad_pcb

LoFive PCB layout, top view — open source RISC-V board by Roshan-khatri78

About the LoFive PCB

LoFive is an open source RISC-V PCB design by Roshan-khatri78, published on GitHub. It is a 4-layer board measuring 18 × 38 mm, with 27 components from 19 distinct parts.

Its main chip is the XL4015, from the RISC-V family. Other key parts include the L78L05ABU, TL431DBZ, LM358_DFN and SPX3819M5-L-1-8. By type, the board carries 15 capacitors, 5 ICs, 3 resistors, 2 connectors, 1 crystal and 1 switch.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design. While they may not be perfect, I continuously improve my skills and update my work as I learn and grow.

A collection of electronics projects I designed in KiCad: schematics, PCB layouts, 3D models and, for many of them, Gerber files. I use it to learn by building, and every project here taught me something, including the mistakes. New projects get added as I go.

My biggest and most complex design so far: a 4-layer 4G GPS tracker board with an ESP32-S3 and a 4G modem with built-in GNSS. I redrew the whole schematic by hand as hierarchical sheets, assigned every footprint and 3D model, then placed and routed the full board.

LoFive, from the project README
From the project README

Main components on the LoFive

LoFive bill of materials (BOM)

27 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XL4015
FE310-G000
U1
1
L78L05ABU
IS25LP128-JBLE
U2
1
TL431DBZ
SN74LVC1G07DCKRG4
U3
1
LM358_DFN
SPX3819M5-L-3-3
U4
1
SPX3819M5-L-1-8
U5
1
Crystal
Y1
2
SCREW_TERMINAL_01X02
Conn_01x14_Pin
J1, J2
1
SW_Push
SW1
1
470UF
0.1uF
C1
1
10UF
10uF
C2
1
470UF
10uF
C3
1
10UF
10nF
C4
2
1UF
12pF
C5, C6
1
1UF
0.1uF
C7
7
0.1uF
C8, C10, C11, C12, C13, C14, C15
1
10uF
C9
1
10K
100K
R1
1
270
100K
R2
1
2.2K
100K
R3

LoFive design files

The KiCad project lives in the Roshan-khatri78/Electronics-Projects-KiCad- repository on GitHub; these links point at the commit this page was built from.

LoFive: common questions

What microcontroller does the LoFive use?

The LoFive is built around the XL4015, from the RISC-V family.

How big is the LoFive PCB?

The LoFive measures 18 × 38 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the LoFive?

27 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LoFive design files?

From the Roshan-khatri78/Electronics-Projects-KiCad- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LoFive design in my own project?

The repository has no license, so all rights stay with Roshan-khatri78. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LoFive without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in Electronics-Projects-KiCad-

Similar boards