6 open source boards using the SPX3819M5-L-1-8

Real designs built with the SPX3819M5-L-1-8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the SPX3819M5-L-1-8

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SPX3819M5-L-1-8 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 5V on 6 of 6 designs.
  • The OUT pin is tied to 1.8V on 6 of 6 designs.
  • The EN pin is tied to 5V on 5 of 6 designs.
  • The BP pin is left unconnected on 4 of 6 designs (a signal on 2).
INpin 1Connected to: 5V 100%
GNDpin 2Connected to: GND 83% · a signal 17%
ENpin 3Connected to: 5V 83% · a signal 17%
BPpin 4Connected to: Not connected 67% · a signal 33%
  • Capacitor to GND on 33% · 100 nF (1), 20 pF (1)
OUTpin 5Connected to: 1.8V 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Toern by Soundpauli, Pi hat by race-on, BitshokaNini V1.1 by kuenrg153 and BitshokaNini V1.2 by kuenrg153.

The SPX3819M5-L-1-8 in open source designs

The gallery holds 6 open source boards using the SPX3819M5-L-1-8 from 6 GitHub repositories; a typical one measures about 56.5 × 63.7 mm and carries around 94 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Toern by Soundpauli.

Microcontrollers on boards using the SPX3819M5-L-1-8

SPX3819M5-L-1-8: common questions

Where can I find a SPX3819M5-L-1-8 reference design?

Each of the 6 boards on this page is a real design using the SPX3819M5-L-1-8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SPX3819M5-L-1-8 IN pin connected?

The IN pin is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SPX3819M5-L-1-8.

How is the SPX3819M5-L-1-8 OUT pin connected?

The OUT pin is tied to 1.8V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SPX3819M5-L-1-8.

How is the SPX3819M5-L-1-8 EN pin connected?

The EN pin is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SPX3819M5-L-1-8.

What parts are used alongside the SPX3819M5-L-1-8?

The 24MHZ, EMC2101, ESP32-S3-WROOM-1, LM358 and RT9080-33GJ5 appear in the most repositories here.

Which microcontrollers do boards using the SPX3819M5-L-1-8 use?

Most are built on ESP32 (2) and AVR/Arduino (1).

How big is a typical board using the SPX3819M5-L-1-8?

The median is 56.5 × 63.7 mm, and 33% are two-layer designs.

What is the most popular open source board using the SPX3819M5-L-1-8?

By GitHub stars, Toern by Soundpauli, with 21 stars.

Can I simulate one of these boards using the SPX3819M5-L-1-8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part