14 open source boards using the ADXL375BCCZ
Real designs built with the ADXL375BCCZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Active drag system
RocketryVT
33 × 90 mm75 parts4LMIT6STM32
TeleSTERN
shorlee
90 × 45 mm293 parts6LGPL-3.03STM32
DAQ-V4.1
IlyaasAitSimmou
38 × 100 mm76 parts4LNo license1STM32
Croi
ULAS-HiPR
60 × 60 mm62 parts6LNo license1STM32
Main-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
CANSAT ARLISS STM32
JosephPalacios-so
90 × 75 mm110 parts4LNo license0NXP
Flight-Computer
Tim-Drake0
82 × 38 mm61 parts2LNo license0RP2040/RP2350
Active drag system minimal
RocketryVT
33 × 81.8 mm67 parts4LMIT6STM32
Pyro-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
FH2 Flight Computer
EPFLRocketTeam
80 × 80 mm245 parts4LNo license0STM32
Production MCU TOP 2 in 1
rayho6240-arch
137 × 80 mm94 parts4LNo license0STM32
Radio-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1STM32
Second layer MCU
rayho6240-arch
68 × 68 mm94 parts4LNo license0STM32
Recovery-Module
Rowan-Rocketry
76.2 × 48.3 mm49 parts4LNo license1
How designs wire the ADXL375BCCZ
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ADXL375BCCZ connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_I/O pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The VS pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF).
- The RESERVED pins is left unconnected on 89% of them (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_I/Opin 1 | Connected to: 3.3V 100% |
|
| GNDpin 2, 4, 5 | Connected to: GND 100% | — |
| RESERVEDpin 3, 11 | Connected to: Not connected 89% | — |
| VSpin 6 | Connected to: 3.3V 89% |
|
| *CSpin 7 | Connected to: The microcontroller 56% · 3.3V 33% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SDO/ALT_ADDRESSpin 12 | Connected to: The microcontroller 56% · 3.3V 33% |
|
| SDA/SDI/SDIOpin 13 | Connected to: The microcontroller 56%, MS560702BA03-50 22% |
|
| SCL/SCLKpin 14 | Connected to: The microcontroller 56%, MS560702BA03-50 22% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Active drag system by RocketryVT, TeleSTERN by shorlee, DAQ-V4.1 by IlyaasAitSimmou and Main-Module by Rowan-Rocketry.
The ADXL375BCCZ in open source designs
The gallery holds 14 open source boards using the ADXL375BCCZ from 9 GitHub repositories; a typical one measures about 76.2 × 64 mm and carries around 71 components.
93% use four copper layers or more, and 21% carry an open source license.
The most starred is Active drag system by RocketryVT.
Parts used alongside the ADXL375BCCZ
Microcontrollers on boards using the ADXL375BCCZ
What boards using the ADXL375BCCZ are built for
ADXL375BCCZ: common questions
Where can I find a ADXL375BCCZ reference design?
Each of the 14 boards on this page is a real design using the ADXL375BCCZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADXL375BCCZ VDD_I/O pin?
The VDD_I/O pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the ADXL375BCCZ.
What decoupling capacitors do designs use on the ADXL375BCCZ VS pin?
The VS pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the ADXL375BCCZ.
How is the ADXL375BCCZ RESERVED pin connected?
The RESERVED pins is left unconnected on 89% of them (GND on 2). Counted from the KiCad layouts of 9 open source designs using the ADXL375BCCZ.
What parts are used alongside the ADXL375BCCZ?
The MS560702BA03-50, MMC5983MA, BMI088 and W25Q128JVS appear in the most repositories here.
Which microcontrollers do boards using the ADXL375BCCZ use?
Most are built on STM32 (11), RP2040/RP2350 (2) and NXP (1).
How big is a typical board using the ADXL375BCCZ?
The median is 76.2 × 64 mm, and 7% are two-layer designs.
What is the most popular open source board using the ADXL375BCCZ?
By GitHub stars, Active drag system by RocketryVT, with 6 stars.
Can I simulate one of these boards using the ADXL375BCCZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.