Starbie

Royal-Ibu·Starbie·schematics/Starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by Royal-Ibu

About the Starbie PCB

Starbie is an open source ESP32 PCB design by Royal-Ibu, published on GitHub under the MIT license. It is a 2-layer board measuring 101 × 82.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

From the project

All schematic files, PCB layouts, design exports, and related images are uploaded here.

All schematic files, PCB layouts, design exports, and related images are uploaded here.

Examples: - .sch / .kicadsch - .kicadpcb - PDFs - PNG/JPG renderings - Gerber or manufacturing exports

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
CONN_01X08_PIN
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Starbie design files

The KiCad project lives in the Royal-Ibu/Starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 101 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the Royal-Ibu/Starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

Yes, under the terms of its MIT license, which Royal-Ibu chose for the repository.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards