Touch sensor main

rsdlab·SOTA_RakuRakuGuitar·PCB_data/touch_sensor_main/touch_sensor_main.kicad_pcb

Touch sensor main PCB layout, top view — open source board by rsdlab

About the Touch sensor main PCB

Touch sensor main is an open source PCB design by rsdlab, published on GitHub. It is a 2-layer board measuring 181 × 110 mm, with 85 components from 12 distinct parts.

Other key parts include the LM393NG and 74HC595. By type, the board carries 34 resistors, 32 diodes, 8 connectors, 5 ICs, 4 capacitors and 1 transistor.

It belongs with the sensors designs in this gallery.

From the project

RakuRakuGuitar for SSIH2022 by team SOTA

らくラクギターは誰でもかっこよく簡単に弾けるをコンセプトに開発されたギターである。

ビギナーモード ホイールを回すだけで演奏できるモード コードモード 弦を模したタッチセンサを1箇所もしくは2箇所押さえるだけで演奏できるモード * マニュアルモード 本物のギターと同様に演奏できるモード

らくラクギターはM,m,7,sus4,dim,aug,M7,m7,7sus4に対応している。

タッチセンサやグランド線を通すためのスペースはギターのネックをノミや彫刻刀で彫る。

タッチセンサ制御部の基板データがPCBdata/touchsensormain、指版部の基板データがPCBdata/touchsensortouchとなっている。

書き込みはArduino IDEを用いる。ビルドも書き込みもメインコアからサブコア3まで1つづつしなければいけないので注意が必要である。メインコアへの書き込みはメモリを640KByteとすること。

Touch sensor main, from the project README
From the project README

Main components on the Touch sensor main

LM393NG74HC595

Touch sensor main bill of materials (BOM)

85 components, 12 distinct parts.

QtyPartRefs
1
LM393NG
IC1
4
74HC595
U1, U2, U3, U4
1
2SC1815
Q1
1
PH-2X10RG
J1
2
Conn_01x02_Male
J2, J3
1
Conn_01x03_Female
J4
4
Conn_01x08_Female
J81, J82, J83, J84
1
R_POT
RV1
32
D
D11, D12, D13, D14, D15, D16, D17, D18 +24
4
C
C1, C2, C3, C4
1
3k
R1
33
R
R2, R11, R12, R13, R14, R15, R16, R17 +25

Touch sensor main design files

The KiCad project lives in the rsdlab/SOTA_RakuRakuGuitar repository on GitHub; these links point at the commit this page was built from.

Touch sensor main: common questions

How big is the Touch sensor main PCB?

The Touch sensor main measures 181 × 110 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Touch sensor main?

85 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Touch sensor main design files?

From the rsdlab/SOTA_RakuRakuGuitar repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Touch sensor main design in my own project?

The repository has no license, so all rights stay with rsdlab. Use it as a reference, and ask the author before reusing the design.

Similar boards