Spotify controller

RT-CUSTOMZ·Spotify-Controller·HW/Spotify_controller.kicad_pcb

Spotify controller PCB layout, top view — open source ESP32 board by RT-CUSTOMZ

About the Spotify controller PCB

Spotify controller is an open source ESP32 PCB design by RT-CUSTOMZ, published on GitHub. It is a 2-layer board measuring 38 × 100 mm, with 52 components from 31 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 16 resistors, 9 capacitors, 7 connectors, 7 switches, 6 diodes and 4 test points.

Main components on the Spotify controller

Spotify controller bill of materials (BOM)

52 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
AP2112K-3.3
U4
1
CONN_02X04_TOP_BOTTOM
Conn_02x04_Top_Bottom
J1
1
CONN_01X04
Conn_01x04
J2
1
CONN_01X05_SOCKET
Conn_01x05_Socket
J3
1
DNP
USB_B_Micro
J4
1
CONN_01X03
Conn_01x03
J5
2
CONN_01X09_PIN
Conn_01x09_Pin
J6, J7
1
Battery_Holder
BT1
3
SW_Push
SW1, SW3, SW4
1
SW_Push
SW2
1
Boot
SW5
1
RotaryEncoder_Switch
SW6
1
SW_DIP_X01
SW_DIP_x01
SW7
1
Bat+
TP1
1
Bat-
TP2
1
GND
TP3
1
3V3
TP4
1
LED
D1
2
1N4148
D2, D3
Show 11 more
QtyPartRefs
2
1N5819
D4, D5
1
Zweifarb-LED
D6
3
1u
C1, C4, C10
5
100N
100n
C2, C3, C5, C6, C12
1
4N7
4n7
C11
4
300R
R1, R11, R15, R16
2
100R
R2, R3
3
10K
10k
R4, R5, R6
3
22R
R7, R9, R10
1
1M
R8
3
10K
10k
R12, R13, R14

Spotify controller design files

The KiCad project lives in the RT-CUSTOMZ/Spotify-Controller repository on GitHub; these links point at the commit this page was built from.

Spotify controller: common questions

What microcontroller does the Spotify controller use?

The Spotify controller is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Spotify controller PCB?

The Spotify controller measures 38 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Spotify controller?

52 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Spotify controller design files?

From the RT-CUSTOMZ/Spotify-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Spotify controller design in my own project?

The repository has no license, so all rights stay with RT-CUSTOMZ. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Spotify controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Spotify-Controller

Similar boards