Spotify controller nutzen
RT-CUSTOMZ·Spotify-Controller·HW/Spotify_controller_nutzen.kicad_pcb
About the Spotify controller nutzen PCB
Spotify controller nutzen is an open source ESP32 PCB design by RT-CUSTOMZ, published on GitHub. It is a 2-layer board measuring 76.4 × 100 mm, with 52 components from 31 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 16 resistors, 9 capacitors, 7 connectors, 7 switches, 6 diodes and 2 ICs.
Main components on the Spotify controller nutzen
Spotify controller nutzen bill of materials (BOM)
52 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32_C3_Wroom_02-easysolder | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | CONN_02X04_TOP_BOTTOM Conn_02x04_Top_Bottom | USB_C_and_Oled | J1 |
| 1 | CONN_01X04 Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X05_SOCKET Conn_01x05_Socket | Encoder KY-040 | J3 |
| 1 | DNP USB_B_Micro | USB_B_Micro_CN | J4 |
| 1 | CONN_01X03 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J5 |
| 2 | CONN_01X09_PIN Conn_01x09_Pin | PinHeader_1x09_P1.27mm_Vertical | J6, J7 |
| 1 | 3V3 | Pin_D1.3mm_L11.0mm | 3V3 |
| 1 | Battery_Holder | Battery_holder | BT1 |
| 1 | GND | Pin_D1.3mm_L11.0mm | GND1 |
| 3 | SW_Push | SW_PUSH_6mm_H7.3mm | SW1, SW3, SW4 |
| 1 | SW_Push | SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | Boot | SW_PUSH_6mm_H4.3mm | SW5 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |
| 1 | SW_DIP_X01 SW_DIP_x01 | Drahtschalter | SW7 |
| 1 | Bat+ | Pin_D1.0mm_L10.0mm | TP1 |
| 1 | Bat- | Pin_D1.0mm_L10.0mm | TP2 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D4, D5 |
| 1 | Zweifarb-LED | LED-3Pin | D6 |
| 3 | 1u | C_Radial_D5.0mm_H11.0mm_P2.00mm_liegend | C1, C4, C10 |
| 5 | 100N 100n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3, C5, C6, C12 |
| 1 | 4N7 4n7 | C_Disc_D4.7mm_W2.5mm_P5.00mm | C11 |
| 4 | 300R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R11, R15, R16 |
| 2 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 3 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6 |
| 3 | 22R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9, R10 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14 |
Spotify controller nutzen design files
The KiCad project lives in the RT-CUSTOMZ/Spotify-Controller repository on GitHub; these links point at the commit this page was built from.
Spotify controller nutzen: common questions
What microcontroller does the Spotify controller nutzen use?
The Spotify controller nutzen is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Spotify controller nutzen PCB?
The Spotify controller nutzen measures 76.4 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spotify controller nutzen?
52 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spotify controller nutzen design files?
From the RT-CUSTOMZ/Spotify-Controller repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Spotify controller nutzen design in my own project?
The repository has no license, so all rights stay with RT-CUSTOMZ. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spotify controller nutzen without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Spotify-Controller
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k