Hermes-6-Axis accelerometer

rubaiyat666·Hermes-6-Axis-accelerometer·Hermes/Hermes.kicad_pcb

Hermes-6-Axis accelerometer PCB layout, top view — open source RP2040/RP2350 board by rubaiyat666

About the Hermes-6-Axis accelerometer PCB

Hermes-6-Axis accelerometer is an open source RP2040/RP2350 PCB design by rubaiyat666, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 60 mm, with 9 components from 7 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. Other key parts include the MPU-6050. By type, the board carries 4 capacitors, 2 ICs, 2 resistors and 1 LED.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Hermes is a 3-Axis accelerometer that uses an embeded mpu6050 for controlling and gyro sensing. It has a Xiao RP2040 as a micro controller for it's compact size and versatile use. It's intended use could be in a bicycle or any other device that's position and gyro data needs to be mesured.

Hermes is a 6-Axis accelerometer that uses an embeded mpu6050 for controlling and gyro sensing. It has a Xiao RP2040 as a micro controller for it's compact size and versatile use.Designed for real-time motion data visualization in a small, badge-friendly form factor. It's intended use could be in a bicycle or any other device that's position and gyro data needs to be mesured.This is made in kicad and the files needed can be found in this directory.

Hermes-6-Axis accelerometer, from the project README
From the project README

Main components on the Hermes-6-Axis accelerometer

Hermes-6-Axis accelerometer bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MPU-6050
U1
1
XIAO-RP2040-DIP
U2
1
OLED_128X64_1.3_I2C
DS1
2
0.1µF
C1, C2
1
2.2nF
C3
1
10nF
C4
2
4.7kΩ
R1, R2

Hermes-6-Axis accelerometer design files

The KiCad project lives in the rubaiyat666/Hermes-6-Axis-accelerometer repository on GitHub; these links point at the commit this page was built from.

Hermes-6-Axis accelerometer: common questions

What microcontroller does the Hermes-6-Axis accelerometer use?

The Hermes-6-Axis accelerometer is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Hermes-6-Axis accelerometer PCB?

The Hermes-6-Axis accelerometer measures 41 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hermes-6-Axis accelerometer?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hermes-6-Axis accelerometer design files?

From the rubaiyat666/Hermes-6-Axis-accelerometer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hermes-6-Axis accelerometer design in my own project?

Yes, under the terms of its MIT license, which rubaiyat666 chose for the repository.

Can I test firmware for the Hermes-6-Axis accelerometer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards