Capteur
RubisCatty·Serre-Connecte·KiCAD/Capteur/Capteur.kicad_pcb
About the Capteur PCB
Capteur is an open source ESP32 PCB design by RubisCatty, published on GitHub. It is a 4-layer board measuring 43.9 × 41 mm, with 36 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the AZ1117CH-3.3TRG1 and AP7363-33D-13. By type, the board carries 13 resistors, 9 capacitors, 5 diodes, 3 ICs, 3 connectors and 2 switches.
From the project
Projet final du programme de Génie Électrique par Sonia Michaud
Contient: Code source des trois modules: Maison, Serre et Capteur
Main components on the Capteur
Capteur bill of materials (BOM)
36 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | AZ1117CH-3.3TRG1 | SOT-223-3_TabPin2 | U2 |
| 1 | AP7363-33D-13 | TO-252-2 | U5 |
| 1 | SI3099-TP CSD13380F3 | SOT-23_Handsoldering | Q1 |
| 1 | UJ20-C-H-G-SMT-2A-P16-TR USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | TSW-103-07-F-S Connecteur humidite | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 640456-2 Connection batterie | PinHeader_2x01_P2.54mm_Vertical | J3 |
| 1 | PTS636SM43SMTR LFS Boot | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | PTS636SM43SMTR LFS EN | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 2 | 1N5819HW-7-F | D_SOD-123 | D1, D3 |
| 2 | B1701NB--20D000114U1930 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 1 | SMF5.0A-TP | D_SOD-123F | D5 |
| 3 | CL21B104KCFWPNE 0.1uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4 |
| 5 | CL21B106KOQNNNE 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6, C7, C8 |
| 1 | CL21A226MQQNNNE 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 5 | RC0805JR-070RL 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R5, R11, R12 |
| 2 | RK73H2ATTD5101F 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | CRCW08051K00FKEA 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8 |
| 1 | RC0805JR-070RL 0(?) | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | CRCW080510K0FKEA 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0805FR-07100KL 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | CRG0805F220K 220k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
Capteur design files
The KiCad project lives in the RubisCatty/Serre-Connecte repository on GitHub; these links point at the commit this page was built from.
Capteur: common questions
What microcontroller does the Capteur use?
The Capteur is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the Capteur PCB?
The Capteur measures 43.9 × 41 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Capteur?
36 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Capteur design files?
From the RubisCatty/Serre-Connecte repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Capteur design in my own project?
The repository has no license, so all rights stay with RubisCatty. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Capteur without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Serre-Connecte
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k