Maison

RubisCatty·Serre-Connecte·KiCAD/Maison/Maison.kicad_pcb

Maison PCB layout, top view — open source ESP32 board by RubisCatty

About the Maison PCB

Maison is an open source ESP32 PCB design by RubisCatty, published on GitHub. It is a 4-layer board measuring 57.7 × 41 mm, with 35 components from 18 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the AP7363-33D-13. By type, the board carries 13 resistors, 7 capacitors, 5 switches, 5 diodes, 3 connectors and 2 ICs.

From the project

Projet final du programme de Génie Électrique par Sonia Michaud

Contient: Code source des trois modules: Maison, Serre et Capteur

Main components on the Maison

Maison bill of materials (BOM)

35 components, 18 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R8
ESP32-S3-WROOM-1
U1
1
AP7363-33D-13
U5
1
UJ20-C-H-G-SMT-2A-P16-TR
USB_C_Receptacle_USB2.0_16P
J1
1
PPTC141LFBN-RC
Écran
J2
1
640456-2
Connection au mur
J3
1
PTS636SM43SMTR LFS
Boot
SW1
1
PTS636SM43SMTR LFS
EN
SW2
3
PTS636SM43SMTR LFS
SW_Push
SW3, SW4, SW5
2
1N5819HW-7-F
D1, D3
2
B1701NB--20D000114U1930
LED
D2, D4
1
SMF5.0A-TP
1N4148WT
D5
3
CL21B104KCFWPNE
0.1uF/50V
C1, C3, C4
4
CL21B106KOQNNNE
10uF
C2, C5, C6, C8
4
CRCW080510K0FKEA
10k
R1, R9, R13, R14
2
RK73H2ATTD5101F
5.1k
R2, R3
4
RC0805JR-070RL
0
R4, R5, R10, R11
2
CRCW08051K00FKEA
1k
R6, R8
1
RC0805JR-070RL
0(?)
R7

Maison design files

The KiCad project lives in the RubisCatty/Serre-Connecte repository on GitHub; these links point at the commit this page was built from.

Maison: common questions

What microcontroller does the Maison use?

The Maison is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the Maison PCB?

The Maison measures 57.7 × 41 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Maison?

35 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Maison design files?

From the RubisCatty/Serre-Connecte repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Maison design in my own project?

The repository has no license, so all rights stay with RubisCatty. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Maison without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Serre-Connecte

Similar boards