IR2302-testboard
About the IR2302-testboard PCB
IR2302-testboard is an open source PCB design by rusefi, published on GitHub. It is a 2-layer board measuring 78 × 62 mm, with 45 components from 14 distinct parts.
Other key parts include the IR2302. By type, the board carries 15 capacitors, 12 resistors, 6 transistors, 5 connectors, 4 diodes and 3 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
open source repo just for rusEFI Hardware
open source repo just for rusEFI Hardware
See also https://github.com/rusefi/rusefi/tree/master/hardware
Many adapters are available assembled at https://shop.rusefi.com
Connector on one side, screw terminals or pads for your own harness on the other
24 pin generic 24 pin to three connectors 135 pin Subaru single connector (3D models only) * 154 pin Volkswagen Audi VAG 284617-1
Main components on the IR2302-testboard
IR2302-testboard bill of materials (BOM)
45 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IR2302 | SO-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 4 | IRFR7440 | TO-252-2 | Q1, Q2, Q3, Q4 |
| 2 | AO3400A | SOT-23 | Q5, Q6 |
| 5 | SCREW_TERMINAL_01X04 Screw_Terminal_01x04 | TerminalBlock_MetzConnect_Type055_RT01504HDWU_1x04_P5.00mm_Horizontal | J1, J2, J3, J4, J5 |
| 1 | C2297 Green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 3 | 1N5819WS | D_SOD-323 | D2, D3, D4 |
| 6 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 5 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C10, C11, C12 |
| 1 | 470U 470u | CP_Elec_10x10.5 | C9 |
| 3 | 10N 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C15 |
| 4 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R10 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 6 | 10 | R_0603_1608Metric | R6, R7, R8, R9, R11, R12 |
IR2302-testboard design files
The KiCad project lives in the rusefi/rusefi-hardware repository on GitHub; these links point at the commit this page was built from.
IR2302-testboard: common questions
How big is the IR2302-testboard PCB?
The IR2302-testboard measures 78 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IR2302-testboard?
45 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IR2302-testboard design files?
From the rusefi/rusefi-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IR2302-testboard design in my own project?
The repository has no license, so all rights stay with rusefi. Use it as a reference, and ask the author before reusing the design.
More boards in rusefi-hardware
STM32Frankenso
154.1 × 161.7 mm614 parts2LNo license48
STM32GDI-STM
154 × 160 mm304 parts4LNo license48
STM32GDI-4ch
164 × 118 mm303 parts4LNo license48
STM32GDI 6ch
154 × 160 mm244 parts4LNo license48
STM32MicroRusEFI
80.6 × 93.7 mm235 parts2LNo license48
STM32Lambda x2
81.9 × 95 mm230 parts4LNo license48
STM32Wideband controller
54.1 × 65.8 mm129 parts4LNo license48
UaBrain gm e38
149 × 105.9 mm129 parts4LNo license48
VR-Hall
49 × 52 mm52 parts2LNo license48
MC33810-breakout
78 × 50 mm35 parts2LNo license48
Tle9104-breakout
34.5 × 42.2 mm20 parts4LNo license48
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979