MC33810-breakout
About the MC33810-breakout
MC33810-breakout is an open source PCB design by rusefi, published on GitHub. It is a 2-layer board measuring 78 × 50 mm, with 35 components from 13 distinct parts.
Other key parts include the MCZ33810EK and XC6202P332MR-G. By type, the board carries 13 resistors, 11 capacitors, 5 connectors, 4 transistors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
https://www.nxp.com/products/power-management/smart-switches-and-drivers/low-side-switches/automotive-engine-control-ic:MC33810
https://www.nxp.com/products/power-management/smart-switches-and-drivers/low-side-switches/automotive-engine-control-ic:MC33810
https://github.com/andreika-git/hellen-one/issues/173
Main components on the MC33810-breakout
MC33810-breakout bill of materials (BOM)
35 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCZ33810EK | Mcz33810 | U1 |
| 1 | XC6202P332MR-G | SOT-23 | U2 |
| 4 | ISL9V3040S3S | TO-263-2 | Q1, Q2, Q3, Q4 |
| 1 | 6473423-1 | 6473423-1 | J1 |
| 4 | Pad | PAD-TH | P1, P2, P3, P4 |
| 6 | 100N 100n | C0603 | C1, C4, C6, C7, C8, C9 |
| 4 | 10U 10u | C_0805_2012Metric | C2, C5, C10, C11 |
| 1 | 100P 100p | C0603 | C3 |
| 2 | 10K 10k | R0603 | R1, R2 |
| 2 | 100 | R0603 | R3, R4 |
| 1 | 0.02 | Shunt_1206 | R5 |
| 4 | 36K 36k | R_2512_6332Metric | R6, R8, R10, R12 |
| 4 | 4.02K 4.02k | R_1206_3216Metric | R7, R9, R11, R13 |
MC33810-breakout design files
The KiCad project lives in the rusefi/rusefi-hardware repository on GitHub; these links point at the commit this page was built from.
MC33810-breakout: common questions
How big is the MC33810-breakout?
The MC33810-breakout measures 78 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MC33810-breakout?
35 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MC33810-breakout design files?
From the rusefi/rusefi-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MC33810-breakout design in my own project?
The repository has no license, so all rights stay with rusefi. Use it as a reference, and ask the author before reusing the design.
More boards in rusefi-hardware
STM32Frankenso
154.1 × 161.7 mm614 parts2LNo license48
STM32GDI-STM
154 × 160 mm304 parts4LNo license48
STM32GDI-4ch
164 × 118 mm303 parts4LNo license48
STM32GDI 6ch
154 × 160 mm244 parts4LNo license48
STM32MicroRusEFI
80.6 × 93.7 mm235 parts2LNo license48
STM32Lambda x2
81.9 × 95 mm230 parts4LNo license48
STM32Wideband controller
54.1 × 65.8 mm129 parts4LNo license48
UaBrain gm e38
149 × 105.9 mm129 parts4LNo license48
VR-Hall
49 × 52 mm52 parts2LNo license48
IR2302-testboard
78 × 62 mm45 parts2LNo license48
Tle9104-breakout
34.5 × 42.2 mm20 parts4LNo license48
Similar boards
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979