9 open source boards using the MCZ33810EK
Real designs built with the MCZ33810EK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
DropBear
speeduino
116.1 × 98 mm196 parts2LNo license282ESP32
OPEN ECU
aeonSolutions
168.9 × 123.3 mm282 parts2LCC0-1.0160STM32
OpenEFI rev4 bkp
Churrosoft
164 × 118 mm317 parts4LCERN-OHL-S-2.08STM32
UEFI-v6.x
Churrosoft
116.5 × 98 mm193 parts4LNo license2STM32
UEFI
Churrosoft
99 × 113 mm228 parts4LCERN-OHL-S-2.08Hellen1-mcz33810
andreika-git
44.8 × 12.5 mm32 parts4LNo license36STM32
STM32F rev3
Churrosoft
159.6 × 99.6 mm171 parts4LCERN-OHL-S-2.08STM32
ΜEFI rev2
Churrosoft
99.9 × 99.3 mm151 parts4LCERN-OHL-S-2.08MC33810-breakout
rusefi
78 × 50 mm35 parts2LNo license48
How designs wire the MCZ33810EK
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCZ33810EK connects to, and the resistors, capacitors and other passives placed on it.
- The FB0 pin has a series capacitor on 3 of 6 designs, most often 10 pF (then 100 nF).
- The FB0 pin has a resistor to GND on 3 of 6 designs, most often 4.02 kΩ.
- The FB0 pin has a series resistor on 3 of 6 designs, most often 36 kΩ.
- The OUTEN pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FB0pin 2 | Connected to: Not connected 50% · a signal 50% |
|
| CSpin 4 | Connected to: The microcontroller 33% |
|
| VDDpin 8 | Connected to: 3.3V 100% |
|
| OUTENpin 9 | Connected to: The microcontroller 33% |
|
| FB1pin 15 | Connected to: Not connected 50% · a signal 50% |
|
| FB3pin 18 | Connected to: Not connected 50% · a signal 50% |
|
| VPWRpin 25 | Connected to: 12V 100% |
|
| RSPpin 26 | Connected to: Not connected 50% · a signal 50% |
|
| RSNpin 27 | Connected to: Not connected 50% · a signal 50% |
|
| FB2pin 31 | Connected to: Not connected 50% · a signal 50% |
|
| GNDpin 33 | Connected to: GND 100% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DropBear by speeduino, OPEN ECU by aeonSolutions, MC33810-breakout by rusefi and Hellen1-mcz33810 by andreika-git.
The MCZ33810EK in open source designs
The gallery holds 9 open source boards using the MCZ33810EK from 6 GitHub repositories; a typical one measures about 116.1 × 99.3 mm and carries around 193 components.
67% use four copper layers or more, and 56% carry an open source license.
The most starred is DropBear by speeduino.
Parts used alongside the MCZ33810EK
What boards using the MCZ33810EK are built for
MCZ33810EK: common questions
Where can I find a MCZ33810EK reference design?
Each of the 9 boards on this page is a real design using the MCZ33810EK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCZ33810EK FB0 pin connected?
The FB0 pin has a series capacitor on 3 of 6 designs, most often 10 pF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the MCZ33810EK.
What resistor goes on the MCZ33810EK OUTEN pin?
The OUTEN pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the MCZ33810EK.
How is the MCZ33810EK FB1 pin connected?
The FB1 pin has a series capacitor on 3 of 6 designs, most often 10 pF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the MCZ33810EK.
What parts are used alongside the MCZ33810EK?
The TC4424AVOA, BMP280, SP720ABTG, AMS1117-3.3 and L78M05ABDT-TR appear in the most repositories here.
Which microcontrollers do boards using the MCZ33810EK use?
Most are built on STM32 (5) and ESP32 (2).
How big is a typical board using the MCZ33810EK?
The median is 116.1 × 99.3 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCZ33810EK?
By GitHub stars, DropBear by speeduino, with 282 stars.
Can I simulate one of these boards using the MCZ33810EK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.