Project 1 LED Torch
Ruthvik-reddy-A·PCB-design-projects·LED Torch/Project 1 LED Torch.kicad_pcb
About the Project 1 LED Torch PCB
Project 1 LED Torch is an open source PCB design by Ruthvik-reddy-A, published on GitHub. It is a 2-layer board measuring 59.3 × 25.9 mm, with 4 components from 4 distinct parts.
By type, the board carries 1 battery holder, 1 switch, 1 diode and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs. These projects were originally built to improve my skills in circuit design, PCB layout, power electronics, and embedded systems.
A simple, compact, and low-power LED torch circuit designed for basic lighting applications. This project demonstrates the use of common electronic components to build a reliable and reusable LED lighting system powered by batteries.
- ✅ Efficient LED driver using discrete components - 🔋 Battery-powered (1.5V/3V/AA/AAA or coin cell based) - 🔄 Optional on/off switch or push button - 💡 Designed for white LED (or red/green/blue options) - 🪛 Minimal component count for easy DIY assembly
Project 1 LED Torch bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery_Cell | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | SW_DPDT_x2 | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10K R1 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Project 1 LED Torch design files
The KiCad project lives in the Ruthvik-reddy-A/PCB-design-projects repository on GitHub; these links point at the commit this page was built from.
Project 1 LED Torch: common questions
How big is the Project 1 LED Torch PCB?
The Project 1 LED Torch measures 59.3 × 25.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project 1 LED Torch?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Project 1 LED Torch design files?
From the Ruthvik-reddy-A/PCB-design-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Project 1 LED Torch design in my own project?
The repository has no license, so all rights stay with Ruthvik-reddy-A. Use it as a reference, and ask the author before reusing the design.
More boards in PCB-design-projects
ESP32
GPS-GSM Tracker with EEPROM Logging
Ruthvik-reddy-A
103.9 × 77.6 mm59 parts4LNo license0AVR/Arduino
MCU DATA LOGGER
Ruthvik-reddy-A
51.6 × 32.4 mm25 parts4LNo license0BB power supply
Ruthvik-reddy-A
55.1 × 31.2 mm17 parts2LNo license0Tiny Solar Powe Supply
Ruthvik-reddy-A
29 × 17.4 mm16 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k