MCU DATA LOGGER

Ruthvik-reddy-A·PCB-design-projects·MCU-Datalogger-With-Built-In-512K-EEPROM/MCU datalogger.kicad_pcb

MCU DATA LOGGER PCB layout, top view — open source AVR/Arduino board by Ruthvik-reddy-A

About the MCU DATA LOGGER PCB

MCU DATA LOGGER is an open source AVR/Arduino PCB design by Ruthvik-reddy-A, published on GitHub. It is a 4-layer board measuring 51.6 × 32.4 mm, with 25 components from 16 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 24LC1025 and DS1337S_. By type, the board carries 7 resistors, 5 capacitors, 4 ICs, 4 connectors, 2 crystals and 2 diodes.

From the project

Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs. These projects were originally built to improve my skills in circuit design, PCB layout, power electronics, and embedded systems.

This repository contains the complete PCB design files and documentation for a microcontroller-based data logger with 512KB external EEPROM. The system is designed to log sensor data and store it in non-volatile memory, making it ideal for long-term, standalone data acquisition applications.

📐 PCB Type: 2-layer, through-hole/SMD hybrid

MCU DATA LOGGER, from the project README
From the project README

Main components on the MCU DATA LOGGER

MCU DATA LOGGER bill of materials (BOM)

25 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
24LC1025
U1, U2
1
DS1337S_
U3
1
ATMEGA328P-AU
U4
1
16 MHz
Y1
1
32.768 KHz
Y2
2
CONN_01X04_PIN
Conn_01x04_Pin
J1, J2
1
CONN_01X09_PIN
Conn_01x09_Pin
J3
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J4
1
Battery
BT1
2
LED
D1, D2
2
0.1UF
0.1uF
C1, C4
2
22PF
22pF
C2, C3
1
100NF
100nF
C5
3
10K
R1, R2, R6
2
4.7K
R3, R4
2
330
R5, R7

MCU DATA LOGGER design files

The KiCad project lives in the Ruthvik-reddy-A/PCB-design-projects repository on GitHub; these links point at the commit this page was built from.

MCU DATA LOGGER: common questions

What microcontroller does the MCU DATA LOGGER use?

The MCU DATA LOGGER is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the MCU DATA LOGGER PCB?

The MCU DATA LOGGER measures 51.6 × 32.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MCU DATA LOGGER?

25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MCU DATA LOGGER design files?

From the Ruthvik-reddy-A/PCB-design-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MCU DATA LOGGER design in my own project?

The repository has no license, so all rights stay with Ruthvik-reddy-A. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MCU DATA LOGGER without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB-design-projects

Similar boards