GPS-GSM Tracker with EEPROM Logging

Ruthvik-reddy-A·PCB-design-projects·GPS + GSM Tracker with EEPROM Logging/GPS-GSM Tracker with EEPROM Logging.kicad_pcb

GPS-GSM Tracker with EEPROM Logging PCB layout, top view — open source ESP32 board by Ruthvik-reddy-A

About the GPS-GSM Tracker with EEPROM Logging PCB

GPS-GSM Tracker with EEPROM Logging is an open source ESP32 PCB design by Ruthvik-reddy-A, published on GitHub. It is a 4-layer board measuring 103.9 × 77.6 mm, with 59 components from 43 distinct parts.

Its main chip is the 24LC1025, from the ESP32 family. Other key parts include the DS1337S_, ATMEGA328P-AU, AMS1117-5.0, TXS0108EPW and SIM800C. By type, the board carries 19 resistors, 11 capacitors, 10 ICs, 7 connectors, 7 diodes and 2 switches.

It belongs with the rf & radio, power & battery and iot & wireless designs in this gallery.

From the project

Welcome to my curated collection of hardware design projects focused on practical, compact, and beginner-to-intermediate level printed circuit board (PCB) designs. These projects were originally built to improve my skills in circuit design, PCB layout, power electronics, and embedded systems.

An ESP32-S3 based IoT hardware project for location tracking using a GPS module (NEO-8Q), with real-time updates via GSM (SIM800C) and local data logging using an I²C EEPROM (AT24C256). Power is managed via a 3.7V LiPo battery, TP4056 charger, and MT3608 boost converter.

- 📍 Real-time GPS tracking (NEO-8Q) - 📡 GSM-based data transmission (SIM800C) - 📦 EEPROM logging (AT24C256) for offline storage - 🔋 Battery-powered with charging via TP4056 - ⚡ Boost conversion to 4.1V using MT3608 - 🧠 Controlled by ESP32-S3 (WROOM-1)

GPS-GSM Tracker with EEPROM Logging, from the project README
From the project README

Main components on the GPS-GSM Tracker with EEPROM Logging

GPS-GSM Tracker with EEPROM Logging bill of materials (BOM)

59 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
24LC1025
ESP32-S3-WROOM-1
U1
1
DS1337S_
CAT24C256
U3
1
ATMEGA328P-AU
NEO-8Q
U4
1
AMS1117-5.0
U6
1
TXS0108EPW
U7
1
SIM800C
U11
2
PAT1220-C-10DB
U12, U13
1
TP4056
U14
1
MT3608
U15
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
1
CONN_02X03_ODD_EVEN
Conn_01x02_Pin
J4
2
Conn_01x07_Pin
J5, J8
2
Conn_01x04_Pin
J6, J7
1
SIM_Card
J9
1
3.7 Li-ion
BT4
2
SW_Push
SW1, SW2
1
Thermistor_NTC
TH3
1
SS14
D5
1
Green LED
D8
1
Orange LED
D9
Show 23 more
QtyPartRefs
1
D_Zener
D10
1
ESDA6V1SC5
D11
2
LED
D13, D14
1
4.7uH
L2
2
10u
C14, C15
1
100uF
C16
1
1uF
C17
1
10pF
C18
1
33pF
C19
3
22pF
C20, C21, C22
1
100nF
C23
1
C
C26
1
10K
4.7k
R6
1
330
4.7k
R7
4
10k
R9, R10, R11, R33
2
330
R20, R21
3
51
R22, R23, R24
2
1k
R27, R28
1
0.4
R29
1
Rprog
R30
2
R
R31, R32
1
100k
R34
1
13k
R35

GPS-GSM Tracker with EEPROM Logging design files

The KiCad project lives in the Ruthvik-reddy-A/PCB-design-projects repository on GitHub; these links point at the commit this page was built from.

GPS-GSM Tracker with EEPROM Logging: common questions

What microcontroller does the GPS-GSM Tracker with EEPROM Logging use?

The GPS-GSM Tracker with EEPROM Logging is built around the 24LC1025, from the ESP32 family.

How big is the GPS-GSM Tracker with EEPROM Logging PCB?

The GPS-GSM Tracker with EEPROM Logging measures 103.9 × 77.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the GPS-GSM Tracker with EEPROM Logging?

59 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GPS-GSM Tracker with EEPROM Logging design files?

From the Ruthvik-reddy-A/PCB-design-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the GPS-GSM Tracker with EEPROM Logging design in my own project?

The repository has no license, so all rights stay with Ruthvik-reddy-A. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the GPS-GSM Tracker with EEPROM Logging without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-design-projects

Similar boards