IC 002 - Acoustic Nb-IoT Daughter Board
ryanstevensmith·locust_hardware·IC_002 - Acoustic Nb-IoT Daughter Board/working/IC_002 - Acoustic Nb-IoT Daughter Board.kicad_pcb
About the IC 002 - Acoustic Nb-IoT Daughter Board
IC 002 - Acoustic Nb-IoT Daughter Board is an open source PCB design by ryanstevensmith, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 102.5 × 76.6 mm, with 70 components from 22 distinct parts.
Other key parts include the BC65PB-04-STD and SRV05-4HTG-D. By type, the board carries 24 resistors, 23 capacitors, 11 transistors, 6 connectors, 3 diodes and 2 ICs.
It belongs with the iot & wireless, power & battery and audio designs in this gallery.
From the project
The electronics repository for the locust project by Imperial College
Open hardware for Locust, a low-cost acoustic monitoring sensor developed with Imperial College London. It records audio to a microSD card in the field and can optionally send data over NB-IoT through a plug-in daughter board.
This repository contains the KiCad design files, manufacturing outputs and a firmware flashing tool for the electronics.
- MCU: Espressif ESP32-S3-WROOM-1 (N16R8: 16 MB flash, 8 MB PSRAM) - Audio chain: Syntiant SPV0142LR5H analogue MEMS microphone → TI OPA1671 preamp → TI TLV320ADC3101 audio ADC (I2S) - Storage: microSD card - Power: single-cell Li-ion input, TI…

Main components on the IC 002 - Acoustic Nb-IoT Daughter Board
IC 002 - Acoustic Nb-IoT Daughter Board bill of materials (BOM)
70 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC65PB-04-STD BC65 | BC65 | U1 |
| 1 | SRV05-4HTG-D | TSOT-23-6 | U2 |
| 11 | BC817-QR BC817 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +3 |
| 1 | CON-SMA-EDGE-S SMA | CON-SMA-EDGE-S | J1 |
| 1 | 104224-0820 | MOLEX_104224-0820 | J2 |
| 1 | 52207-1060 | 52207-1060 | J3 |
| 2 | - Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 1 | U.FL-R-SMT(10) U.FL | U.FL-R-SMT-1_1 | J6 |
| 1 | P15124TR-ND 1A/32V | Fuse_0603_1608Metric | F1 |
| 2 | P6SMBJ5.0CA | D_SMB | D1, D2 |
| 1 | APTD1608VBC/D Blue | LED_0603_1608Metric | D3 |
| 1 | GRM188C71C225KE11D 2.2uF | C_0603_1608Metric | C1 |
| 2 | TAJB107M006RNJ 100uF | CP_EIA-3528-21_Kemet-B | C2, C8 |
| 4 | GCM188R71H104KA57J 100nF | C_0603_1608Metric | C3, C9, C13, C14 |
| 1 | GRM1885C1H101JA01D 100pF | C_0603_1608Metric | C4 |
| 8 | GRM1885C1H220JA01D 22pF | C_0603_1608Metric | C5, C6, C7, C10, C11, C12, C22, C23 |
| 7 | GCM188R71H102KA37D 1nF | C_0603_1608Metric | C15, C16, C17, C18, C19, C20, C21 |
| 2 | CRCW06030000Z0EA 0R | R_0603_1608Metric | R1, R24 |
| 1 | CRCW060321K0FKEA 21K | R_0603_1608Metric | R2 |
| 9 | CRCW060310K0FKEA 10K | R_0603_1608Metric | R3, R4, R5, R8, R10, R11, R14, R15 +1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | CRCW06034K70FKEAC 4K7 | R_0603_1608Metric | R6, R7, R9, R12, R13, R16, R17 |
| 5 | CRCW06031K00FKEA 1K | R_0603_1608Metric | R19, R20, R21, R22, R23 |
IC 002 - Acoustic Nb-IoT Daughter Board design files
The KiCad project lives in the ryanstevensmith/locust_hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutIC_002 - Acoustic Nb-IoT Daughter Board/working/IC_002 - Acoustic Nb-IoT Daughter Board.kicad_pcb
- SchematicIC_002 - Acoustic Nb-IoT Daughter Board/working/IC_002 - Acoustic Nb-IoT Daughter Board.kicad_sch
- BOMIC_001 - Low Cost Audio Sensor/IC_001 - Low Cost Audio Sensor - Release v3.0/manufacturing files/IC_001 - Low Cost Audio Sensor - BoM EXT - v3.0.csv
IC 002 - Acoustic Nb-IoT Daughter Board: common questions
How big is the IC 002 - Acoustic Nb-IoT Daughter Board?
The IC 002 - Acoustic Nb-IoT Daughter Board measures 102.5 × 76.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IC 002 - Acoustic Nb-IoT Daughter Board?
70 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IC 002 - Acoustic Nb-IoT Daughter Board design files?
From the ryanstevensmith/locust_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IC 002 - Acoustic Nb-IoT Daughter Board design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which ryanstevensmith chose for the repository.
More boards in locust_hardware
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k