Low Cost Audio Sensor
ryanstevensmith·locust_hardware·IC_001 - Low Cost Audio Sensor/working/IC_001 - Low Cost Audio Sensor.kicad_pcb
About the Low Cost Audio Sensor PCB
Low Cost Audio Sensor is an open source ESP32 PCB design by ryanstevensmith, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 115 × 107 mm, with 137 components from 37 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the BQ21080YBGR, BQ27427YZFR, TPS63000DRCR, SPV0142LR5H and TLV320ADC3101IRGER. By type, the board carries 53 diodes, 30 resistors, 23 capacitors, 8 ICs, 7 connectors and 7 switches.
It belongs with the audio, iot & wireless and power & battery designs in this gallery.
From the project
The electronics repository for the locust project by Imperial College
Open hardware for Locust, a low-cost acoustic monitoring sensor developed with Imperial College London. It records audio to a microSD card in the field and can optionally send data over NB-IoT through a plug-in daughter board.
This repository contains the KiCad design files, manufacturing outputs and a firmware flashing tool for the electronics.
- MCU: Espressif ESP32-S3-WROOM-1 (N16R8: 16 MB flash, 8 MB PSRAM) - Audio chain: Syntiant SPV0142LR5H analogue MEMS microphone → TI OPA1671 preamp → TI TLV320ADC3101 audio ADC (I2S) - Storage: microSD card - Power: single-cell Li-ion input, TI…

Main components on the Low Cost Audio Sensor
Low Cost Audio Sensor bill of materials (BOM)
137 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ21080YBGR BQ21080 | Texas_DSBGA-8-1.6mmx1mm_P0.4mm | U1 |
| 1 | BQ27427YZFR BQ27427 | Texas_DSBGA-9-1.6mmx1.6_P0.5mm | U2 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 2 | TPS63000DRCR TPS63000 | Texas_DRC0010J_ThermalVias | U4, U10 |
| 1 | SPV0142LR5H | SPV0142LR5H-1 | U5 |
| 1 | TLV320ADC3101IRGER | QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm | U11 |
| 1 | OPA1671IDBVR | TSOT-23-5 | U13 |
| 1 | DMP3013SFV-7 DMP3013SFV | Diodes_PowerDI3333-8 | Q3 |
| 1 | USB4115-03-C | USB_C_Receptacle_GCT_USB4115-03-C | J1 |
| 1 | BM05B-SRSS-TB JST_SH | JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J2 |
| 1 | 532610371 53261-0371 | Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J3 |
| 1 | 503398-1892 | 503398-1892 | J4 |
| 1 | 52207-1060 | 52207-1060 | J6 |
| 2 | SM04B-SRSS-TB JST_SH | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7, J8 |
| 2 | JK-SMD0603-100L 1A/6V | Fuse_0603_1608Metric | F1, F2 |
| 2 | B3U-1000P SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 5 | TL3305AF260QG | SW_SPST_TL3305A | SW4, SW5, SW6, SW7, SW8 |
| 40 | SK6812MINI-HS SK6806 - j | LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D1, D2, D9, D10, D11, D12, D13, D14 +32 |
| 1 | BZT52C6V8LP-7 | X1-DFN1006-2 | D3 |
| 12 | ESD761DPYR ESD761 | Texas_DPY0002A_0.6x1mm_P0.65mm | D4, D5, D6, D7, D8, D42, D43, D44 +4 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | BLM15PX221SN1D | L_0402_1005Metric | L1, L3, L4, L6 |
| 2 | SMNR4020-2.2UH 2.2uH | L_Bourns-SRN4018 | L2, L5 |
| 11 | 885012205037 100nF | C_0402_1005Metric | C1, C4, C7, C8, C13, C22, C23, C24 +3 |
| 10 | T491A106K010AT 10uF | CP_EIA-3216-18_Kemet-A | C2, C3, C5, C6, C16, C17, C18, C20 +2 |
| 1 | 0402B103K500NT 10n | C_0402_1005Metric | C14 |
| 1 | 0402X225K6R3NT 2u2 | C_0402_1005Metric | C15 |
| 12 | CRCW040210K0FKEDC 10K | R_0402_1005Metric | R1, R4, R6, R7, R9, R10, R12, R13 +4 |
| 2 | 0402WGF0000TCE 0R | R_0402_1005Metric | R2, R3 |
| 3 | 0402WGF4702TCE 47K | R_0402_1005Metric | R5, R32, R33 |
| 3 | 0402WGJ0105TCE 1M | R_0402_1005Metric | R8, R11, R22 |
| 2 | 0402WGJ0184TCE 180K | R_0402_1005Metric | R15, R17 |
| 1 | 0402WGJ0165TCE 1M6 | R_0402_1005Metric | R16 |
| 2 | 0402WGJ0512TCE 5K1 | R_0402_1005Metric | R23, R24 |
| 2 | 0402WGJ0220TCE 22R | R_0402_1005Metric | R25, R26 |
| 1 | CRCW04024K70FKEDC 4K7 | R_0402_1005Metric | R28 |
| 1 | 0402WGJ0185TCE 1M8 | R_0402_1005Metric | R29 |
| 1 | 0402WGJ0221TCE 220R | R_0402_1005Metric | R34 |
Low Cost Audio Sensor design files
The KiCad project lives in the ryanstevensmith/locust_hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutIC_001 - Low Cost Audio Sensor/working/IC_001 - Low Cost Audio Sensor.kicad_pcb
- SchematicIC_001 - Low Cost Audio Sensor/working/IC_001 - Low Cost Audio Sensor.kicad_sch
- BOMIC_001 - Low Cost Audio Sensor/IC_001 - Low Cost Audio Sensor - Release v3.0/manufacturing files/IC_001 - Low Cost Audio Sensor - BoM EXT - v3.0.csv
Low Cost Audio Sensor: common questions
What microcontroller does the Low Cost Audio Sensor use?
The Low Cost Audio Sensor is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Low Cost Audio Sensor PCB?
The Low Cost Audio Sensor measures 115 × 107 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Low Cost Audio Sensor?
137 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Low Cost Audio Sensor design files?
From the ryanstevensmith/locust_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Low Cost Audio Sensor design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which ryanstevensmith chose for the repository.
Can I test firmware for the Low Cost Audio Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in locust_hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k