HardLabs

Pokemon-Devboard

sahilchess·Pokemon-Devboard·PCB_DESIGN/pokemon_devboard.kicad_pcb

Pokemon-Devboard PCB layout, top view — open source RP2040/RP2350 board by sahilchess

About the Pokemon-Devboard PCB

Pokemon-Devboard is an open source RP2040/RP2350 PCB design by sahilchess, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 46 components from 24 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT and W25Q128JVS. By type, the board carries 17 capacitors, 11 resistors, 8 connectors, 3 ICs, 2 LEDs and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

a pokemon themed rp2040 dev board designed in kicad, arduino lookalike

a pokemon themed rp2040 dev board designed in kicad, arduino lookalike

- rp2040 mcu, 30 gpio broken out - usb_c input with mcp1700 3.3v regulator - w25q128jvs 16mb qspi flash for program storage - 12mhz crystal oscillator - reset button and bootsel button - 2 user leds on gpio2 and gpio3 - 2 user buttons on gpio4 and gpio5 - swd debug header (swclk, swdio, gnd) - gpioa and gpiob headers for full pin access - power headers for gnd, 3v3, and 5v lines - test pads for gnd, 3v3, 5v, swclk, swdio, run, and 2 mounting holes - clear pinouts with silkscreen

Pokemon-Devboard, from the project README
From the project README

Main components on the Pokemon-Devboard

RP2040MCP1700X-330XXTTW25Q128JVS

Pokemon-Devboard bill of materials (BOM)

46 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700X-330XXTT
MCP1700x-330xxTT
U2
1
W25Q128JVS
U3
1
CRYSTAL_GND24_WITH_4_PIN
Crystal_GND24_WITH_4_PIN
Y2
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
1
gpioB
J2
1
gpioA
J4
1
C49257
debug
J5
1
C124414
power
J6
1
gnd line
J8
1
3v3 line
J9
1
5v line
J11
3
SW_Push
GPIO4, GPIO5, RUN1
1
bootsel
SW1
2
LED
GPIO2, GPIO3
11
0.1UF
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +3
2
1UF
1uF
C9, C10
2
10UF
10uF
C13, C14
2
33PF
33pF
C15, C16
2
5.1K
R1, R2
Show 4 more
QtyPartRefs
2
22
R3, R4
2
1K
R5, R7
3
10K
R6, R8, R11
2
220
R9, R10

Pokemon-Devboard design files

The KiCad project lives in the sahilchess/Pokemon-Devboard repository on GitHub; these links point at the commit this page was built from.

Pokemon-Devboard: common questions

What microcontroller does the Pokemon-Devboard use?

The Pokemon-Devboard is built around the RP2040, from the RP2040/RP2350 family.

How big is the Pokemon-Devboard PCB?

The Pokemon-Devboard measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pokemon-Devboard?

46 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pokemon-Devboard design files?

From the sahilchess/Pokemon-Devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pokemon-Devboard design in my own project?

The repository has no license, so all rights stay with sahilchess. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pokemon-Devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards