Custom relay board

SamanHushi·esp_smart_relay_board·custom_relay_board/custom_relay_board.kicad_pcb

Custom relay board layout, top view — open source ESP32 board by SamanHushi

About the Custom relay board

Custom relay board is an open source ESP32 PCB design by SamanHushi, published on GitHub. It is a 4-layer board measuring 92.9 × 60.9 mm, with 68 components from 21 distinct parts.

Its main chip is the ESP32-C3_SUPERMINI, from the ESP32 family. Other key parts include the MCP23017_SO, CD74HC4051M96 and BTT62004E. By type, the board carries 29 resistors, 20 capacitors, 6 ICs, 5 connectors and 3 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

Project to conect multiple low power 5V and 12V devices, messure usage and control it with ESPHome

Project to conect multiple low power 5V and 12V devices, messure usage and control it with ESPHome

Interactive BOMs: https://samanhushi.github.io/sensorstick_minimal

Main components on the Custom relay board

Custom relay board bill of materials (BOM)

68 components, 21 distinct parts.

QtyPartRefs
1
ESP32-C3_SUPERMINI
U1
1
MCP23017_SO
U2
1
CD74HC4051M96
U3
3
BTT62004E
U5, U7, U8
1
694106301002
Wurth Elektronik
J1
1
Screw_Terminal_01x03
J10
3
62100821921
Wurth Elektronik
J15, J16, J17
5
33kΩ NTC
TH1, TH2, TH3, TH4, TH5
3
BAS21
D1, D2, D3
9
100nF
C1, C5, C9, C12, C14, C17, C18, C20 +1
3
4x10nF
C2, C4, C19
3
100pF
C3, C6, C15
5
10µF
C10, C11, C13, C16, C21
3
1.2kΩ
R1, R3, R39
3
27Ω
R2, R4, R25
5
33kΩ
R5, R6, R7, R8, R9
4
10kΩ
R31, R32, R33, R45
3
0Ω
R40, R43, R44
2
2x10kΩ Array
RN1, RN2
6
4x10kΩ
RN3, RN4, RN5, RN6, RN9, RN11
Show 1 more
QtyPartRefs
3
4x47kΩ
RN7, RN8, RN10

Custom relay board design files

The KiCad project lives in the SamanHushi/esp_smart_relay_board repository on GitHub; these links point at the commit this page was built from.

Custom relay board: common questions

What microcontroller does the Custom relay board use?

The Custom relay board is built around the ESP32-C3_SUPERMINI, from the ESP32 family.

How big is the Custom relay board?

The Custom relay board measures 92.9 × 60.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Custom relay board?

68 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Custom relay board design files?

From the SamanHushi/esp_smart_relay_board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Custom relay board design in my own project?

The repository has no license, so all rights stay with SamanHushi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Custom relay board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp_smart_relay_board

Similar boards