OpenResonance
samer-cyber·OpenResonance·PCB and Circuit/OpenResonance.kicad_pcb
About the OpenResonance PCB
OpenResonance is an open source ESP32 PCB design by samer-cyber, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 46 mm, with 25 components from 16 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the MCP73831-2-OT and AP2112K-3.3. By type, the board carries 7 resistors, 5 connectors, 4 capacitors, 3 ICs, 3 diodes and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
The custom v1 board: a 30 x 52 mm 2-layer PCB integrating the ESP32-C3, motor drivers, USB-C charging, and battery management.
The custom v1 board: a 30 x 52 mm 2-layer PCB integrating the ESP32-C3, motor drivers, USB-C charging, and battery management.
1. Go to jlcpcb.com, choose Order now, and upload GERBER-OpenResonance.zip. 2. Options the original boards were ordered with: FR-4, 2 layers, 1.0 mm thickness, black solder mask with white silkscreen, HASL finish, tented vias, 1 oz outer copper. The minimum order is five boards; a pair of wristbands needs two, so you will have spares. 3. Assembled route: enable PCB Assembly, upload BOM-OpenResonance.csv and CPL-OpenResonance.csv, and check the part placement preview…
Main components on the OpenResonance
OpenResonance bill of materials (BOM)
25 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 2 | C20917 Q_NMOS_GSD | SOT-23 | Q1, Q3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 4 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2, J3, J4, J5 |
| 1 | C318884 SW_SPDT | SW_SPDT_Shouhan_MSK12C02 | SW1 |
| 1 | C2286 LED_Small | LED_0603_1608Metric | D1 |
| 2 | C8598 D_Schottky | D_SOD-123 | D2, D3 |
| 3 | 10UF 10uF | C_0603_1608Metric | C1, C2, C3 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C4 |
| 2 | 100K 100k | R_0603_1608Metric | R1, R6 |
| 2 | 5.1K | R_0603_1608Metric | R2, R5 |
| 1 | 10K 10k | R_0603_1608Metric | R3 |
| 1 | 2K | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R7 |
OpenResonance design files
The KiCad project lives in the samer-cyber/OpenResonance repository on GitHub; these links point at the commit this page was built from.
OpenResonance: common questions
What microcontroller does the OpenResonance use?
The OpenResonance is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the OpenResonance PCB?
The OpenResonance measures 30 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OpenResonance?
25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenResonance design files?
From the samer-cyber/OpenResonance repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OpenResonance design in my own project?
Yes, under the terms of its MIT license, which samer-cyber chose for the repository.
Can I test firmware for the OpenResonance without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k