Nrf52840-devkit

samodostal·nrf52840-devkit

Nrf52840-devkit PCB layout, top view — open source Nordic nRF board by samodostal

About the Nrf52840-devkit PCB

Nrf52840-devkit is an open source Nordic nRF PCB design by samodostal, published on GitHub. It is a 4-layer board measuring 54.4 × 74.8 mm, with 65 components from 38 distinct parts.

Its main chip is the nRF52840, from the Nordic nRF family. Other key parts include the BQ24075RGT and XC6220B331MR. By type, the board carries 25 capacitors, 10 resistors, 7 diodes, 6 connectors, 6 switches and 4 inductors.

Main components on the Nrf52840-devkit

Nrf52840-devkit bill of materials (BOM)

65 components, 38 distinct parts.

QtyPartRefs
1
BQ24075RGT
U1
1
nRF52840
U2
1
XC6220B331MR
U3
1
32.768kHz
Y1
1
32MHz
Y3
1
Analog input header
J1
1
GPIO header 1
J2
1
GPIO header 2
J4
1
Battery header
J5
1
USB_C_Receptacle_USB2.0_14P
J6
1
Debug header
J7
1
Bluetooth antenna
AE2
1
Charge Boost
JP1
4
Keyswitch
SW1, SW2, SW3, SW4
1
Reset button
SW5
1
Power switch
SW6
1
Orange
D1
4
Diode
D2, D3, D4, D5
1
Blue
D6
1
Green
D7
Show 18 more
QtyPartRefs
1
15nH
L1
2
10uH
L2, L3
1
3.9nH
L4
7
4.7uF
C1, C6, C7, C8, C17, C21, C25
4
100nF
C2, C3, C4, C13
3
1uF
C5, C11, C16
1
1nF
C9
1
47nF
C10
1
100pF
C12
4
12pF
C14, C15, C22, C23
1
1.5pF
C18
2
1pF
C19, C20
1
10uF
C24
4
10k
R1, R2, R4, R7
1
2k
R3
2
5.1k
R5, R6
2
1.5k
R8, R10
1
10M
R9

Nrf52840-devkit design files

The KiCad project lives in the samodostal/nrf52840-devkit repository on GitHub; these links point at the commit this page was built from.

Nrf52840-devkit: common questions

What microcontroller does the Nrf52840-devkit use?

The Nrf52840-devkit is built around the nRF52840, from the Nordic nRF family.

How big is the Nrf52840-devkit PCB?

The Nrf52840-devkit measures 54.4 × 74.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Nrf52840-devkit?

65 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Nrf52840-devkit design files?

From the samodostal/nrf52840-devkit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Nrf52840-devkit design in my own project?

The repository has no license, so all rights stay with samodostal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Nrf52840-devkit without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards