Arduino can bus shield v2.1
About the Arduino can bus shield v2.1
Arduino can bus shield v2.1 is an open source PCB design by SamsonChau, published on GitHub. It is a 2-layer board measuring 61.1 × 53.3 mm, with 32 components from 30 distinct parts.
Other key parts include the TPS54331DR, TMC2209-LA and MCP2515-xST. By type, the board carries 7 resistors, 6 connectors, 6 capacitors, 4 diodes, 3 ICs and 3 switches.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
my PCBS
Main components on the Arduino can bus shield v2.1
Arduino can bus shield v2.1 bill of materials (BOM)
32 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54331DR MP1584 Texas Instruments | DC-DC-mp1584_module | U1 |
| 1 | TMC2209-LA MCP2551-I-SN TRINAMIC Motion Control GmbH | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP2515-xST | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | MPU9250_module | MPU9250_module | M1 |
| 1 | 8MHZ 16MHz Yangxing Tech (or similar) | Crystal_SMD_HC49-SD | Y1 |
| 1 | PINHEADER_1X3_P2.54MM Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | PINHEADER_2X4_P2.54MM Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | JST_EH_1X2_P2.50MM_HORIZONTAL Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | FAN0 Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | xt60 male | XT60PW-M20 | J6 |
| 1 | JST_EH_1X3_P2.50MM_HORIZONTAL molex_3.0 | Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J7 |
| 1 | User | SW_SPST_TL3305A | SW1 |
| 1 | User | SW_SPST_TL3305C | SW2 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW3 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 1 | SMBJ24CA | D_SMB_Handsoldering | D1 |
| 1 | ss24 | D_SMB_Handsoldering | D2 |
| 1 | power | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | B5819W user Changjiang Electronics Tech | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 4.7UF 50v 47uF | C_Elec_6.3x7.7 | C1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.1UF 16v 220uF | C_Elec_6.3x7.7 | C2 |
| 1 | 100NF/50V 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 4.7UF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 22NF/50V 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 100NF/50V 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 2 | 4.7K 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 470 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 2 | 0.11 10K 1% 1/4W | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7 |
| 1 | 10K 17K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
Arduino can bus shield v2.1 design files
The KiCad project lives in the SamsonChau/PCB repository on GitHub; these links point at the commit this page was built from.
Arduino can bus shield v2.1: common questions
How big is the Arduino can bus shield v2.1?
The Arduino can bus shield v2.1 measures 61.1 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino can bus shield v2.1?
32 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino can bus shield v2.1 design files?
From the SamsonChau/PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino can bus shield v2.1 design in my own project?
The repository has no license, so all rights stay with SamsonChau. Use it as a reference, and ask the author before reusing the design.
More boards in PCB
STM32Solenoid board
146.1 × 63.5 mm206 parts2LNo license0
STM32Huvud
42 × 42 mm106 parts4LNo license0
RP2040/RP2350POS card
64 × 78.3 mm74 parts2LNo license0
Power connector
80.8 × 107.2 mm64 parts2LNo license0
XT60 connectors
181 × 40.6 mm54 parts2LNo license0
Nucleo F446 power can shield
139.7 × 104.9 mm50 parts2LNo license0
STM32Arduino can bus shield canbus custom
53.3 × 56.4 mm47 parts2LNo license0
Nucleo F446Shield v2
85 × 97.4 mm47 parts2LNo license0
XT60 CAN
141 × 67.6 mm39 parts2LNo license0
ESP32ESP32 CAN TEST
45.7 × 45.8 mm39 parts2LNo license0
Canbus board
73.8 × 34 mm14 parts2LNo license0
Earlier revisions in the repo: arduino_can_bus_shield
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979