EEE3088Proj
SanjanNaidoo·EEE3088Proj
About the EEE3088Proj PCB
EEE3088Proj is an open source PCB design by SanjanNaidoo, published on GitHub. It is a board, with 58 components from 40 distinct parts.
Other key parts include the MT3608, TP4056, CH224K, INA219BXDCN and DRV8833PWP. By type, the board carries 19 resistors, 12 capacitors, 8 test points, 7 ICs, 3 transistors and 3 connectors.
From the project
Repository for 3089 micro-mouse project.
This repo contains relative design and production files for the design of the power subsystem of a micromouse.\
- KiCad for schematic design and PCB layout - STM32L476 microcontroller as part of the larger system - LTSpice for simulation and testing (not included here)
✅ Schematic complete ✅ PCB layout and fabrication files finalized 🚧 PCB Arrival
Main components on the EEE3088Proj
EEE3088Proj bill of materials (BOM)
58 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT3608 | SOT-23-6 | U1 |
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | CH224K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U3 |
| 1 | INA219BXDCN INA219BxDCN | SOT-23-8 | U4 |
| 2 | DRV8833PWP | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U5, U6 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U10 |
| 2 | AO3401A | SOT-23 | Q2, Q3 |
| 1 | SS8050 | SOT-23 | Q4 |
| 1 | CONN_02X16_ODD_EVEN Conn_02x16_Odd_Even | PinHeader_2x16_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |
| 1 | TP8 | TestPoint_Keystone_5019_Miniature | !+PBATT1 |
| 1 | TP9 | TestPoint_Keystone_5019_Miniature | !GND1 |
| 1 | SW_SPDT_312 | SW-TH_SS-12D10L5 | SW4 |
| 1 | !stby | TestPoint_Pad_D1.0mm | TP1 |
| 1 | !chrg | TestPoint_Pad_D1.0mm | TP2 |
| 1 | !prgo | TestPoint_Pad_D1.0mm | TP3 |
| 1 | !5V | TestPoint_Pad_D1.0mm | TP4 |
| 1 | !HV | TestPoint_Pad_D1.0mm | TP5 |
| 1 | !BATT | TestPoint_Pad_D1.0mm | TP6 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | !Fault | TestPoint_Pad_D1.0mm | TP10, TP11 |
| 1 | C2296 green | LED_0603_1608Metric | D1 |
| 1 | C2286 red | LED_0603_1608Metric | D2 |
| 1 | SS34 | D_SMA | D3 |
| 2 | 10NF 10nF | C_0603_1608Metric | C1, C4 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C2, C5 |
| 4 | 10UF 10uF | C_0603_1608Metric | C3, C9, C10, C11 |
| 1 | 1UF 1uF | C_0603_1608Metric | C7 |
| 1 | 22UF 22uF | C_0603_1608Metric | C12 |
| 2 | 10UF 22uF | C_0603_1608Metric | C18, C19 |
| 2 | 15K 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R15 |
| 4 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R17, R19 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R26, R27 |
| 1 | 6.8K 6.8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 2 | 15K 6k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R22 |
| 2 | 47 | R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R24, R25 |
| 1 | 8.2K 8.2k | R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R28 |
| 2 | 1.1K 1.1k | R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R29, R30 |
| 1 | 3K | R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R31 |
| 1 | 1.5K 1.5k | R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R32 |
EEE3088Proj design files
The KiCad project lives in the SanjanNaidoo/EEE3088Proj repository on GitHub; these links point at the commit this page was built from.
EEE3088Proj: common questions
How many components are on the EEE3088Proj?
58 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EEE3088Proj design files?
From the SanjanNaidoo/EEE3088Proj repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the EEE3088Proj design in my own project?
The repository has no license, so all rights stay with SanjanNaidoo. Use it as a reference, and ask the author before reusing the design.