95 open source boards using the CH224K
Real designs built with the CH224K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MuBook
LtBrain
170.2 × 142 mm260 parts4LMIT36Lattepanda MOKA
piecol
100 × 70.1 mm207 parts4LCERN-OHL-S-2.035Astra piNas
jlcjak
100 × 120 mm176 parts6LNo license29USB-GC2
Xenii1642
29.1 × 45.1 mm19 parts2LCERN-OHL-S-2.023PIC
Main
Xenii1642
75.1 × 60.9 mm45 parts4LNo license13Nvme Carrier all M2
El-Luhb
170.2 × 170.2 mm358 parts4LMIT12RP2040/RP2350
Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11CCFL2LED
mijuc
55 × 90 mm57 parts2LGPL-3.07RP2040/RP2350
Opentrig
Dawson-HEP
162.2 × 100 mm408 parts4LEPL-2.06Raspberry Pi
The 4DS
Astronuat21
160 × 90 mm347 parts4LAGPL-3.05ESP32
Electricload
hnz1102
185 × 98 mm71 parts2LNo license5ESP32
Haptic knob
wirano
50 × 50 mm66 parts4LNo license3ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02RP2040/RP2350
Kbn1
souptik-samanta
440 × 150 mm398 parts2LNo license2Film-Scanner
ccyyturralde
70 × 60 mm1 parts2LMIT2ESP32
Wooden Clock - main board
tibm110 × 110 mm183 parts4LNo license1ESP32
SlimeVR Dock
Skaut0071
100 × 78 mm151 parts2LCERN-OHL-P-2.01STM32
ProPrj New Project 2026-07-15 23-14-34 2026-07-27
kms254
250 × 50 mm142 parts4LNo license1Meshtastic node
benkyd
150 × 50 mm110 parts4LNo license1ESP32
MakerAxe lite
makingdevices
56.5 × 99.8 mm97 parts2LNo license16x1A-BT2.0-4.35V-USB-C-charger
tomy983
55 × 35.2 mm84 parts2LNo license1ESP32
Ondaire
rmalchow
120 × 95 mm68 parts2LNo license1ESP32
OmniDrive
TLNKhanh
45 × 59.5 mm66 parts2LMIT1ESP32
ESP32-Mini-Dev-Board
divyansh404-sudo
67 × 58 mm36 parts2LMIT1Usb pd decoy
ricelectric
40.6 × 16.5 mm12 parts2LMIT1RP2040/RP2350
RDAT
Astrid-Delestine
455.2 × 254.8 mm505 parts4LMIT0RP2040/RP2350
Keyboard
souptik-samanta
440 × 150 mm398 parts2LNo license0RP2040/RP2350
Aniboard
cheyao
355 × 120 mm384 parts2LZlib0STM32
PC ExtensionBoard
caotiendattx
128.3 × 98.3 mm263 parts6LNo license0Raspberry Pi
HomeDeck
Kilan777
130 × 105 mm220 parts4LNo license0Raspberry Pi
Node pad v1
Sami9889
100 × 100 mm209 parts4LCERN-OHL-P-2.00RP2040/RP2350
Lightclock
Anvarys
133 × 133 mm191 parts2LNo license0ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00ESP32
Board1 power
DashiellRussell
100 × 100 mm147 parts4LNo license0ESP32
MateRix
FBIopeningUPP
40 × 69 mm145 parts4LNo license0ESP32
Flight Controller
C-yue28
102 × 41.1 mm139 parts6LNo license0
How designs wire the CH224K
Read from the KiCad layouts of 78 open source designs, one per repository: what each pin of the CH224K connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 56 of 78 designs, most often 1 µF (then 100 nF).
- The VBUS pin has a pull-up to VBUS on 48 of 76 designs, most often 10 kΩ (then 1 kΩ).
- The CFG1 pin has a resistor to GND on 32 of 76 designs, most often 6.8 kΩ (then 24 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: Signal 58% · VDD 42% |
|
| VBUSpin 8 | Connected to: Signal 86% |
|
| CFG1pin 9 | Connected to: Signal 70% · GND 21% |
|
| GNDpin 11 | Connected to: GND 97% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Primer Carrier for LattePanda Mu by LattePandaTeam, RS64c PS by lhm0, MuBook by LtBrain and Lattepanda MOKA by piecol.
The CH224K in open source designs
The gallery holds 95 open source boards using the CH224K from 84 GitHub repositories; a typical one measures about 94.1 × 71.3 mm and carries around 76 components.
58% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Lite Carrier for LattePanda Mu by LattePandaTeam.
Parts used alongside the CH224K
Microcontrollers on boards using the CH224K
What boards using the CH224K are built for
CH224K: common questions
Where can I find a CH224K reference design?
Each of the 95 boards on this page is a real design using the CH224K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CH224K VDD pin connected?
The VDD pin has a capacitor to GND on 56 of 78 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 78 open source designs using the CH224K.
What pull-up resistor is used on the CH224K VBUS pin?
The VBUS pin has a pull-up to VBUS on 48 of 76 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 78 open source designs using the CH224K.
What resistor goes on the CH224K CFG1 pin?
The CFG1 pin has a resistor to GND on 32 of 76 designs, most often 6.8 kΩ (then 24 kΩ). Counted from the KiCad layouts of 78 open source designs using the CH224K.
What parts are used alongside the CH224K?
The AMS1117-3.3, USBLC6-2SC6, INA219AxD, AP2112K-3.3 and DRV8833PWP appear in the most repositories here.
Which microcontrollers do boards using the CH224K use?
Most are built on ESP32 (29), RP2040/RP2350 (11), Raspberry Pi (5) and STM32 (5).
How big is a typical board using the CH224K?
The median is 94.1 × 71.3 mm, and 58% are two-layer designs.
What is the most popular open source board using the CH224K?
By GitHub stars, Lite Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.
Can I simulate one of these boards using the CH224K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.