ESP32 Interface1

Saroja-J·ESP32-Board-·4_Layer PCB/ESP32 Interface1.kicad_pcb

ESP32 Interface1 PCB layout, top view — open source ESP32 board by Saroja-J

About the ESP32 Interface1 PCB

ESP32 Interface1 is an open source ESP32 PCB design by Saroja-J, published on GitHub. It is a 4-layer board measuring 103.6 × 75.6 mm, with 60 components from 33 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the CH340C and LM2596S-3.3. By type, the board carries 19 resistors, 16 connectors, 11 capacitors, 5 diodes, 3 ICs and 2 transistors.

It belongs with the iot & wireless, sensors and power & battery designs in this gallery.

From the project

Custom ESP32-WROOM-32D PCB designed in KiCad with USB-UART,I2C,VSPI, and Sensor Interfaces.

A custom ESP32-WROOM-32D Development Board designed in KiCad for IoT and embedded applications. The board integrates USB-to-UART programming, power management, automatic reset and boot circuitry, and GPIO expansion, providing a compact platform for developing Wi-Fi and Bluetooth-enabled systems.

This project is based on the ESP32-WROOM-32D, a Wi-Fi and Bluetooth-enabled microcontroller module from Espressif. The board includes a CH340C USB-to-UART interface, LM2596 buck converter, automatic reset and boot circuitry, GPIO headers, and supporting passive components. It supports UART, SPI, I²C…

ESP32 Interface1, from the project README
From the project README

Main components on the ESP32 Interface1

ESP32 Interface1 bill of materials (BOM)

60 components, 33 distinct parts.

QtyPartRefs
1
CH340C
U1
1
LM2596S-3.3
U2
1
ESP32-WROOM-32D
U3
2
MMBT2222A
Q1, Q2
1
Screw_Terminal_01x02
J1
1
USB_B_Micro
J2
1
Jack-DC
J3
2
Conn_01x02_Socket
J4, J5
1
Conn_01x06_Socket
J6
4
Conn_01x02_Pin
J7, J10, J11, J12
1
Conn_01x04_Pin
J8
1
Conn_01x03_Pin
J9
1
Conn_01x02_Socket
J13
1
Conn_01x16_Pin
J14
1
Conn_01x02_Socket
J15
1
Conn_01x03_Pin
J16
1
R_Potentiometer
RV1
2
SW_Omron_B3FS
SW1, SW2
1
RED
D1
1
YELLOW
D2
Show 13 more
QtyPartRefs
1
SM518
D3
1
GREEN
D4
1
BLUE
D5
1
33uH
L1
1
680/35V
C1
5
C
C2, C5, C6, C7, C8
1
220uF/16V
C3
3
0.1uF
C4, C9, C10
1
10nF
C11
1
2.7K
R1
11
10k
R2, R3, R4, R7, R8, R9, R10, R15 +3
6
330
R5, R6, R11, R12, R13, R14
1
470
R16

ESP32 Interface1 design files

The KiCad project lives in the Saroja-J/ESP32-Board- repository on GitHub; these links point at the commit this page was built from.

ESP32 Interface1: common questions

What microcontroller does the ESP32 Interface1 use?

The ESP32 Interface1 is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the ESP32 Interface1 PCB?

The ESP32 Interface1 measures 103.6 × 75.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ESP32 Interface1?

60 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32 Interface1 design files?

From the Saroja-J/ESP32-Board- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32 Interface1 design in my own project?

The repository has no license, so all rights stay with Saroja-J. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32 Interface1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP32-Board-

Similar boards