Esp32wroom32 dev

sarpharaj-09·PCB_Design·ESPWROOM32_dev/esp32wroom32_dev/esp32wroom32_dev.kicad_pcb

Esp32wroom32 dev PCB layout, top view — open source ESP32 board by sarpharaj-09

About the Esp32wroom32 dev PCB

Esp32wroom32 dev is an open source ESP32 PCB design by sarpharaj-09, published on GitHub. It is a 2-layer board measuring 52 × 29 mm, with 26 components from 20 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3 and STM32F103C8T6. By type, the board carries 7 resistors, 6 capacitors, 3 ICs, 3 connectors, 3 diodes and 2 transistors.

It belongs with the iot & wireless and wearables designs in this gallery.

From the project

A repo for open source PCB Designs.

This project presents a custom-designed ESP32-WROOM-32 development board PCB for embedded systems, electronics prototyping, and Internet of Things (IoT) applications.

The project includes PCB design visualizations, the circuit schematic, and a video demonstration. The board is designed around the ESP32-WROOM-32 module, which provides wireless connectivity and processing capabilities for a wide range of embedded applications.

Esp32wroom32 dev, from the project README
From the project README

Main components on the Esp32wroom32 dev

Esp32wroom32 dev bill of materials (BOM)

26 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
CH340C
U1
1
STM32F103C8T6
AMS1117
U2
1
ESP32-WROOM-32
U3
2
SS8050
Q1, Q2
1
USB_C_Receptacle_USB2.0_16P
J1
2
CONN_01X04_PIN
Conn_01x15_Pin
J2, J3
2
SW_Push
SW1, SW2
1
B5819W
D1
1
RED
D2
1
BLUE
D3
2
22U
100nF
C1, C2
1
10U
100nF
C3
1
100N
10uF/16V
C4
2
100N
100nF
C5, C6
1
1K5
5K1
R1
1
10K
5K1
R2
1
1K5
1K
R3
2
1K5
R
R4, R5
1
220R
R6
1
5K1
R7

Esp32wroom32 dev design files

The KiCad project lives in the sarpharaj-09/PCB_Design repository on GitHub; these links point at the commit this page was built from.

Esp32wroom32 dev: common questions

What microcontroller does the Esp32wroom32 dev use?

The Esp32wroom32 dev is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Esp32wroom32 dev PCB?

The Esp32wroom32 dev measures 52 × 29 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32wroom32 dev?

26 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32wroom32 dev design files?

From the sarpharaj-09/PCB_Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32wroom32 dev design in my own project?

The repository has no license, so all rights stay with sarpharaj-09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32wroom32 dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB_Design

Similar boards