HardLabs

Slimevr nrf52810

Sasasu·slimevr-ble·tracker/nrf52810_icm20948/slimevr-nrf52810.kicad_pcb

Slimevr nrf52810 PCB layout, top view — open source Nordic nRF board by Sasasu

About the Slimevr nrf52810 PCB

Slimevr nrf52810 is an open source Nordic nRF PCB design by Sasasu, published on GitHub. It is a 4-layer board measuring 26 × 26 mm, with 37 components from 23 distinct parts.

Its main chip is the nRF52810-QFxx, from the Nordic nRF family. Other key parts include the XC6206PxxxMR and ICM-20948. By type, the board carries 16 capacitors, 7 resistors, 4 ICs, 3 connectors, 2 crystals and 2 inductors.

It belongs with the iot & wireless designs in this gallery.

Main components on the Slimevr nrf52810

nRF52810-QFxxXC6206PxxxMRICM-20948

Slimevr nrf52810 bill of materials (BOM)

37 components, 23 distinct parts.

QtyPartRefs
1
nRF52810-QFxx
U1
1
XC6206PxxxMR
U2
1
ICM-20948
U3
1
~
U4
1
Q_NMOS_GSD
Q2
1
32768Khz
Y1
1
Crystal_GND24_Small
Y2
1
Conn_02x01
J1
1
Conn_01x07
J2
1
Conn_02x01
J3
1
Antenna
AE2
1
LED
D1
1
10uH
L1
1
15nH
L2
7
100n
C1, C2, C3, C4, C8, C13, C14
1
NC
C5
1
100p
C6
1
1u
C7
6
12p
C9, C10, C11, C12, C15, C16
1
1k
R1
Show 3 more
QtyPartRefs
1
100
R2
2
TODO
R3, R4
3
R_Small
R5, R6, R7

Slimevr nrf52810 design files

The KiCad project lives in the Sasasu/slimevr-ble repository on GitHub; these links point at the commit this page was built from.

Slimevr nrf52810: common questions

What microcontroller does the Slimevr nrf52810 use?

The Slimevr nrf52810 is built around the nRF52810-QFxx, from the Nordic nRF family.

How big is the Slimevr nrf52810 PCB?

The Slimevr nrf52810 measures 26 × 26 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Slimevr nrf52810?

37 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Slimevr nrf52810 design files?

From the Sasasu/slimevr-ble repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Slimevr nrf52810 design in my own project?

The repository has no license, so all rights stay with Sasasu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Slimevr nrf52810 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in slimevr-ble

Similar boards