Half life week1-PCB-starbie
sbhi-cs·half-life-week1-PCB-starbie·KiCad-folder/starbie.kicad_pcb
About the Half life week1-PCB-starbie
Half life week1-PCB-starbie is an open source ESP32 PCB design by sbhi-cs, published on GitHub. It is a 2-layer board measuring 88.2 × 88.2 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the keyboards designs in this gallery.
From the project
This is my week 1 starbie tutorial project. I've never worked with hardware stuff before so hoping this goes well :D
The repo includes the Arduino code (.ino), the schematic diagram of the PCB, and the gerber file of the PCB
I sort of changed it midway through to not be related to starbie but rather my own little character
The project is still the same though: a custom tamagotchi
I made this project because I think tamagotchis are awesome. I also wanted to learn basic hardware and PCB stuff, and make something of my own! When I realized half-life was doing a tutorial on how exactly this is made, I instantly wanted to make one for myself, since I would be learning something new. Through making this, I…
Main components on the Half life week1-PCB-starbie
Half life week1-PCB-starbie bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Half life week1-PCB-starbie design files
The KiCad project lives in the sbhi-cs/half-life-week1-PCB-starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad-folder/starbie.kicad_pcb
- SchematicKiCad-folder/starbie.kicad_sch
Half life week1-PCB-starbie: common questions
What microcontroller does the Half life week1-PCB-starbie use?
The Half life week1-PCB-starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half life week1-PCB-starbie?
The Half life week1-PCB-starbie measures 88.2 × 88.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life week1-PCB-starbie?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Half life week1-PCB-starbie design files?
From the sbhi-cs/half-life-week1-PCB-starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Half life week1-PCB-starbie design in my own project?
The repository has no license, so all rights stay with sbhi-cs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life week1-PCB-starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k