Splitkey

sbunger·SplitBoard·pcb/.splitkey-pcb-KICAD/splitkey.kicad_pcb

Splitkey PCB layout, top view — open source Nordic nRF board by sbunger

About the Splitkey PCB

Splitkey is an open source Nordic nRF PCB design by sbunger, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 277.1 × 112.2 mm, with 122 components from 3 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 60 switches, 60 diodes and 2 ICs.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

A custom designed split keyboard! Has sixty keys and maxes out the XIAO nrf52840's GPIO. It is wireless and has a battery on each side.

This was created to help me become more familiar in CAD software as well as in PCB and firmware creation. I plan to use this as my everyday keyboard as I just use a laptop keyboard right now.

I am using CircuitPython along with the KMK library to run the firmware. Right now, the current firmware will be mapped to the right side, and I have not coded in wireless support yet.

Splitkey, from the project README
From the project README

Main components on the Splitkey

Splitkey bill of materials (BOM)

122 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
XIAO-nRF52840-SMD
U1, U2
60
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +52
60
D
D32, D33, D34, D35, D36, D37, D38, D39 +52

Splitkey design files

The KiCad project lives in the sbunger/SplitBoard repository on GitHub; these links point at the commit this page was built from.

Splitkey: common questions

What microcontroller does the Splitkey use?

The Splitkey is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the Splitkey PCB?

The Splitkey measures 277.1 × 112.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Splitkey?

122 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Splitkey design files?

From the sbunger/SplitBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Splitkey design in my own project?

Yes, under the terms of its GPL-3.0 license, which sbunger chose for the repository.

Can I test firmware for the Splitkey without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in SplitBoard

Similar boards