ESP32S3
sbunger·SplitBoard·pcb/OPL_Kicad_Library-master/Seeed Studio XIAO ESP32S3/ESP32S3.kicad_pcb
About the ESP32S3 PCB
ESP32S3 is an open source ESP32 PCB design by sbunger, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 17.8 × 21.1 mm, with 71 components from 38 distinct parts.
Its main chip is the LP0404N3T5G, from the ESP32 family. Other key parts include the ESP32-S3R8, SGM6029CYG/TR, SGM40567-4.2XG/TR and GD25Q64ENIGR. By type, the board carries 28 capacitors, 13 resistors, 8 test points, 4 ICs, 4 inductors and 3 connectors.
It belongs with the iot & wireless, keyboards and power & battery designs in this gallery.
From the project
A custom designed split keyboard! Has sixty keys and maxes out the XIAO nrf52840's GPIO. It is wireless and has a battery on each side.
Dive into a world of innovation with our curated collection of hardware components straight from the electronics hub of Shenzhen, complemented by an array of parts supported by Seeed Studio. Our mission is to empower makers, developers, and hardware enthusiasts with a diverse repository that streamlines innovation and accelerates development.
The Seeed Fusion Open Parts Libraries (OPL) and the associated component libraries are provided and maintained by the Seeed Studio Fusion team and the wider community for the turnkey Seeed Fusion PCB Assembly (PCBA) Service.

Main components on the ESP32S3
ESP32S3 bill of materials (BOM)
71 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3R8 | QFN56G-0.4-7X7MM | U1 |
| 1 | SGM6029CYG/TR | BGA6-0.35-0.745X10.95X0.4MM | U3 |
| 1 | SGM40567-4.2XG/TR | WLCSP-0.4-0.92X1.16X0.4MM | U4 |
| 1 | GD25Q64ENIGR | USON8-0.8-4X3MM | U5 |
| 1 | LP0404N3T5G | PMOS_1.0_0.6_0.35MM | Q1 |
| 1 | 40MHz/306011364 | X4-SMD-1.6X1.2X0.35MM | X1 |
| 2 | DNP | H7-HALF-HOLE-2.54 | J1, J2 |
| 1 | DF40C-30DP-0.4V(51) | BTB30-0.4-7.52X2.97X1.14 | J3 |
| 1 | U.FL-R-SMT-1 | U-FL3P-SMD-2.6X2.6X1.0MM | ANT1 |
| 1 | VBAT | TP-80X40MIL | BAT0 |
| 1 | GND | TP-80X40MIL | GND0 |
| 2 | SKTAAAE010/311021459 | SW4-SMD-2.8-2.6X1.6X0.53MM | K1, K2 |
| 8 | — | TP-D45MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 1 | UBF31-0171 | USB2.0-TYPE-C | USB0 |
| 1 | RED | LED-0402 | CHG0 |
| 1 | LMBR4010BST5G | DFN1006-2L | D2 |
| 1 | Yellow | LED-0402 | D3 |
| 1 | 2nH | L0201 | L1 |
| 1 | 3.3nH | L0201 | L2 |
| 1 | DNP | L0201 | L3 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470nH | L0603 | L4 |
| 4 | DNP | C0201 | C1, C2, C17, C20 |
| 4 | 2.2uF | C0201 | C3, C9, C13, C16 |
| 3 | 4.7uF | C0201 | C4, C5, C6 |
| 3 | 10pF | C0201 | C7, C8, C28 |
| 4 | 1uF | C0201 | C10, C21, C25, C26 |
| 8 | 100nF | C0201 | C11, C14, C15, C19, C22, C23, C29, C30 |
| 1 | 10nF | C0201 | C12 |
| 1 | 1pF | C0201 | C18 |
| 2 | 5.1K | R0201 | R1, R2 |
| 2 | 22R | R0201 | R3, R4 |
| 1 | 0R | R0201 | R5 |
| 1 | 499R | R0201 | R6 |
| 3 | 10K | R0201 | R7, R8, R11 |
| 1 | 100K | C0201 | R9 |
| 1 | 220K | R0201 | R10 |
| 1 | 249K | R0201 | R13 |
| 1 | 1.5K | R0201 | R15 |
ESP32S3 design files
The KiCad project lives in the sbunger/SplitBoard repository on GitHub; these links point at the commit this page was built from.
ESP32S3: common questions
What microcontroller does the ESP32S3 use?
The ESP32S3 is built around the LP0404N3T5G, from the ESP32 family.
How big is the ESP32S3 PCB?
The ESP32S3 measures 17.8 × 21.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32S3?
71 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32S3 design files?
From the sbunger/SplitBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32S3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which sbunger chose for the repository.
Can I test firmware for the ESP32S3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in SplitBoard
Nordic nRF
Splitkey
sbunger
277.1 × 112.2 mm122 parts2LGPL-3.00Grove - Vision AI Module V2
sbunger
40 × 20 mm112 parts4LGPL-3.00Nordic nRF
Seeed Studio XIAO nRF52840 v1.3
sbunger
21 × 17.8 mm79 parts2LGPL-3.00Wio LR1121 Module v0.9
sbunger
17 × 12 mm69 parts4LGPL-3.00Nordic nRF
XIAO
sbunger
203.1 × 125.1 mm21 parts2LGPL-3.00Wio-SX1262 for ESP32S3
sbunger
17.8 × 21.4 mm15 parts2LGPL-3.00Wio-SX1262 for XIAO nRF52840
sbunger
17.8 × 21.4 mm11 parts2LGPL-3.00
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k