Quad Mixer
schenkzoola·ST04-quad-mixer·hardware/mixer/4ch Mixer.kicad_pcb
About the Quad Mixer PCB
Quad Mixer is an open source PCB design by schenkzoola, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 30 × 100 mm, with 56 components from 14 distinct parts.
Other key parts include the TL074HIDR and TL072HIDR. By type, the board carries 23 resistors, 10 diodes, 8 capacitors, 7 connectors, 2 ICs and 2 fuses.
It belongs with the audio designs in this gallery.
From the project
Four channel mixer for Eurorack (KiCad)
A 6HP Eurorack four-channel active mixer from Schenktronics. Each channel has an input jack and a level knob that takes it from silent up to its own level. The four channels are summed into two outputs: a non-inverting mix (+) and an inverted one (-). Unplugged inputs are silent, so only the channels you patch affect the mix.
- 6HP (30 mm wide), 20 mm deep, powered from ±12 V - Four channels, each with a level knob from silent to x1 - Two outputs: + (the mix) and - (the mix, inverted) - Empty inputs are silent, so unused channels add nothing - Reverse-power protection on both rails - Kits…

Main components on the Quad Mixer
Quad Mixer bill of materials (BOM)
56 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL074HIDR TL074H Texas Instruments | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | TL072HIDR TL072H Texas Instruments | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 6 | ~ QingPu | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CenterHole_OvalPads | J1, J2, J3, J4, J5, J6 |
| 1 | 302-S101 Power On Shore Technology | PinHeader_2x05_P2.54mm_Vertical_Shrouded | P1 |
| 2 | 0ZCJ0020FF2E 200mA Bel Fuse | Fuse_1206_3216Metric | F1, F2 |
| 4 | PTV09A-4020F-B104 100k Bourns | Potentiometer_Alps_RK09L_Plated_Mount_Holes | RV1, RV2, RV3, RV4 |
| 2 | MRA4003T3G ON Semiconductor | D_SMA | D1, D2 |
| 8 | 1N4148WS-7-F 1N4148 Diodes Incorporated | D_SOD-323 | D3, D4, D5, D6, D7, D8, D9, D10 |
| 4 | 08053C104KAT2A 0.1uf AVX | C_0805_2012Metric | C1, C2, C3, C4 |
| 2 | TMK212BBJ106KG-T 10uf Taiyo Yuden | C_0805_2012Metric | C5, C6 |
| 2 | CC0805JRNPO9BN100 10pf Yageo | C_0805_2012Metric | C7, C8 |
| 13 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R1, R2, R3, R4, R9, R10, R11, R12 +5 |
| 4 | RC0805FR-070RL 0 Yageo | R_0805_2012Metric | R5, R6, R7, R8 |
| 6 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R18, R19, R20, R21, R22, R23 |
Quad Mixer design files
The KiCad project lives in the schenkzoola/ST04-quad-mixer repository on GitHub; these links point at the commit this page was built from.
Quad Mixer: common questions
How big is the Quad Mixer PCB?
The Quad Mixer measures 30 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Quad Mixer?
56 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Quad Mixer design files?
From the schenkzoola/ST04-quad-mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Quad Mixer design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687